![](/images/new-backgrounds/1152650/15265015x1.webp)
Replacing the Side Panel
1Align the tabs at the bottom of the side panel to the ridge on the bottom of the chassis. Place the side panel in the proper position on the chassis and slide it toward the front of the chassis.
A
NOTE: There is a 3mm gap between the top of the side panel and the top of the chassis when the side panel is attached properly.
2Ensure that the hole for the thumbscrew aligns with the hole in the chassis, and then replace the thumbscrew (A).
3See “After Closing the PC” on page 3.
4Upgrading and Servicing Guide