Setting Up the Wireless Set
The mouse and keyboard have 255 IDs that are randomly selected when you press the ID button. This helps protect against interference from other wireless devices in the same area.
Important: The word CONNECT is the label for the ID button on the bottom of the mouse and keyboard. To press the ID button, use a blunt pointed object, like the tip of a ballpoint pen.
Important: Whenever you want to set the IDs of both the keyboard and the mouse, you must first set the receiver ID and mouse ID and then set the receiver ID and keyboard ID, as described in this procedure.
1Turn on the computer.
Important: If the ID button is pressed more than one time during the setup, you must start over with step 2.
2On the front of the receiver (D), press the ID button (E) once.
The blue activity light (J) on the receiver starts flashing and continues flashing until the next step is completed or until 30 seconds pass.
D E F G H J
Important: If 30 seconds pass before you complete step 3, you must repeat steps 2 and 3 to set the mouse ID. If the ID button is pressed more than one time during the mouse setup (step 3), you must start over with step 2 and set the receiver ID.
6 | Installing the Wireless Keyboard and Mouse Set |