York YHJF18 warranty Description, Warranty, Features

Page 1

TECHNICAL GUIDE

SPLIT-SYSTEM

HEAT PUMPS

14.5 SEER – R-410A

MODELS: YHJF18 THRU 60

(1.5 THRU 5 NOMINAL TONS, 1 PHASE)

ISO 9001

Certified Quality

Management System

LISTED

Due to continuous product improvement, specifications are subject to change without notice.

Visit us on the web at www.york.com Additional rating information can be found at

www.ahridirectory.org

510667-YTG-A-0409

DESCRIPTION

The heat pump condensing unit is the outdoor part of a versatile system of heating and air conditioning. It is designed to be cus- tom-matched with one of UPG’s complete line of evaporator sections, with each serving a specific function. Matching Air Handlers are available for upflow, downflow, or horizontal appli- cations to provide a complete system. Electric Heaters are available, if required. Add-on coils are available for use with upflow, downflow, or horizontal furnaces and air handlers. Many matches meet Federal Tax Rebate program.

WARRANTY

Single Phase Units:

5-year limited parts warranty.

10-year limited compressor warranty.

FEATURES

QUALITY CONDENSER COILS - The coil is constructed of copper tubing and enhanced aluminum fins for increased efficiency and corrosion protection.

PROTECTED COMPRESSOR - The complete scroll com- pressor line is internally protected against high pressure, temperature, and externally by a factory installed high pres- sure switch. This is accomplished by the simultaneous oper- ation of high pressure relief valve and a temperature sensor which protects the compressor if undesirable operating con- ditions occur. A liquid line filter-drier further protects the com- pressor.

DURABLE FINISH - The cabinet is made of pre-painted steel. The pre-treated galvanized steel provides a better paint to steel bond, which resists corrosion and rust creep. Special primer formulas and matted-textured finish insure less fading when exposed to sunlight.

LOWER INSTALLED COST - Installation time and costs are reduced by easy power and control wiring connections. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof.

TOP DISCHARGE - The warm air from the top mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications.

SWEPT FAN BLADE SOUND JACKET - The upward air flow carries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compres- sor operating sounds. The swept wing fan blade and com- pressor sound jacket futher reduce noise levels.

LOW MAINTENANCE - Long life permanently lubricated motor-bearings need no annual servicing.

EASY SERVICE ACCESS - Fully exposed refrigerant con- nections, and a single panel covering the electrical controls make for easy servicing of the unit.

SECURED SERVICE VALVES - Secured re-usable service valves are provided on both the liquid and vapor sweat con- nections for ease of evacuating and charging.

U.L. and C.U.L. listed - approved for outdoor application.

Agency Listed - U.L. and C.U.L. listed - approved for out- door application. The unit is certified in accordance with the Unitary Small Equipment cerification program, which is based on ARI Standard 210/240.

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

Image 1
Contents Features WarrantyDescription Model Physical and Electrical DataSystem Charge for Various Matched Systems ProceduresFootnotes MV Variable Speed Cooling Capacity With Air Handler CoilsSpeed AHP / SHP / AHX / F*FPUnit Model Furnace Coil MODEL1 Cooling Cooling Capacity With High Efficiency Motor FurnacesCFM Total Sens Seer HP with Variable Speed FURNACES2 Cooling Model MODEL1 Stage Rated Unit FurnaceSeer EER CFM Heating Capacity With Air Handler Coils Heating Performance With Air HandlerModel Furnace COIL1 ARI HEATING2 Hspf Heating Capacity With High Efficiency Motor FurnacesWith Variable Speed FURNACES3 Model Furnace COIL1 ARI HEATING2 Seer HP with Variable Speed FURNACES3 AccessoriesTypical Field Wiring Typical InstallationSQI Cooling Performance Data TemperatureCondensing Entering AIRID WB F 21.7 MV12B FC/MC43B MV16C FC/MC43C ID WB F 34.5 MV20D FC/MC62D Condensing Unit Model NO. YHJF48S41S1 Indoor Coil Model no MV20D FC/MC62D Cooling Performance Data LOW CFM 1-STAGE OperationHigh CFM Cooling Performance Data High CFM 2-STAGE OperationEntering Heating Performance DataOutdoor Unit Indoor Coil MBH COP600 800 1000 27.4 1000 1200 1400 1200 1400 1600 1600 1800 MBH COP MV20D FC/MC62D

YHJF18 specifications

The York YHJF18 is a leading air conditioning unit renowned for its advanced features, technologies, and performance characteristics. Designed to cater to both residential and commercial needs, this model offers reliable cooling solutions with an emphasis on energy efficiency and superior comfort.

One of the defining features of the York YHJF18 is its high Seasonal Energy Efficiency Ratio (SEER) rating. This impressive efficiency metric demonstrates the unit's ability to deliver substantial cooling while utilizing less energy, thereby reducing operating costs and minimizing environmental impact. The YHJF18 effectively strikes a balance between performance and sustainability, making it an excellent choice for eco-conscious consumers.

The unit is equipped with a variable speed compressor, which provides exceptional temperature control and enhanced comfort throughout the space. This technology allows the YHJF18 to operate at different capacities based on the cooling demand, ensuring optimal energy usage and consistent indoor temperatures. Additionally, the compressor's quiet operation contributes to a peaceful environment, making it a popular choice for residential settings.

Another hallmark of the York YHJF18 is its advanced refrigerant technology. Using R-410A refrigerant, the unit is compliant with environmental standards and offers improved heat transfer efficiency. This not only facilitates better cooling performance but also promotes a healthier environment by minimizing ozone depletion potential.

The YHJF18 also features a robust build quality and durable construction designed to withstand various weather conditions. Its galvanized steel cabinet is coated with a corrosion-resistant finish, ensuring long-lasting performance and reliability even in challenging environments. Furthermore, the unit is equipped with a high-performance filter system that helps improve indoor air quality by trapping dust, allergens, and other airborne particles.

Ease of installation and maintenance are additional advantages of the York YHJF18. Its user-friendly design allows for quick setup, while the accessible service points make routine maintenance simple for technicians. This straightforward approach can significantly reduce downtime, ensuring that the comfort of the space is maintained throughout the year.

In conclusion, the York YHJF18 stands out in the competitive air conditioning market due to its blend of advanced technologies, energy-efficient operation, and user-centric design. Whether for a home or commercial premises, this unit represents a solid investment in comfort, efficiency, and reliability.