Removing and Replacing a Stand
5 – 10 minutes
Before You Begin
Observe the following requirements before removing and replacing the stand.
Tools Needed
CAUTION: Static electricity can damage the electronic components inside the computer. Discharge static electricity by touching the metal cage of the computer before touching any internal parts or electronic components.
WARNING:
Never open the cover with the power cord attached or power applied. You may damage your computer.
Avoid touching sharp edges inside the computer.
IMPORTANT: Computer features may vary by model.
Computer Preparation
1Remove any media (CD, DVD, and memory cards) from the computer.
2Shut down the computer.
3Unplug the computer by disconnecting the power cord from the bottom of the computer.
4Unplug all attached cables from the side and bottom of the computer.
22 |
|