HP 8300 manual Boot order for desktops and workstations, SATA2, Network Controller

Page 16

Technical white paper UEFI Secure Boot on HP business notebooks, desktops, and workstations

Boot order for desktops and workstations

On desktops and workstations, the Boot Order menu displays all of the available boot sources in a categorized hierarchy. Each available boot source is presented (as shown below in Figure 11) for one of two primary categories: UEFI Boot Sources or Legacy Boot Sources. Additionally, the Legacy Boot Sources category has a “Hard Drive” sub-category that lists the connection point for each physically-attached, hard-drive-like device. The user may move an entry up or down within any category or sub-category by positioning the cursor next to the desired entry, pressing the ENTER key to select it, using the up and down arrows to reposition the selected entry, and pressing the ENTER key again to accept the new order. The user may also disable any device or category heading in the boot order by using the up and down cursor keys to select the desired entry and pressing the F5 key to change the entry’s state. When disabled, boot order entries are shown in grey, and the text “ : Disabled” is appended to the entry’s descriptive string.

The content of the Boot Order menu can be affected by several other F10 settings.

Legacy Support is automatically disabled when Secure Boot is enabled.

When Legacy Support is disabled in the Secure Boot Configuration Menu, the Legacy Boot Sources category in the Boot Order menu is automatically disabled. Similarly, the Legacy Boot Sources category is automatically enabled when Legacy Support is changed from disabled to enabled.

The Option ROM Launch Policy menu allows the user to control whether only legacy option ROMs, only UEFI option ROMs, or no option ROMs are to control video, mass storage, or network controllers that are detected in the system. The option ROM launch policy for a given controller dictates whether its associated boot sources are shown in the Boot Order menu under UEFI Boot Sources, Legacy Boot Sources, or neither category. Note that all “Legacy-only” option ROM launch policies are automatically switched to “UEFI-only” when Legacy Support is disabled. Likewise, all “UEFI-only” option ROM launch policies are automatically switched to “Legacy-only” when Legacy Support is enabled.

Figure 11. F10 Boot Order when Legacy Support is enabled and disabled (desktops and workstations)

F10 Boot Order when Secure Boot is disabled, Legacy Support is enabled, and all option ROM launch policies are “Legacy-only”. In this example, the SATA0 hard drive legacy boot source has been disabled using the F5 key.

UEFI Boot Sources

USB Floppy/CD

USB Hard Drive

Windows Boot Manager

Legacy Boot Sources

USB Floppy/CD

Hard Drive

USB Hard Drive

SATA0 : Disabled

SATA2

Network Controller

F10 Boot Order when Legacy Support is disabled and all option ROM launch policies are “UEFI-only”. In this example, all legacy boot sources have been disabled because Legacy Support is disabled. Also, the IP4 and IP6 UEFI boot sources have replaced the Network Controller legacy boot source because the PXE option ROM launch policy has been forced to change from “Legacy-only” to “UEFI-only”.

UEFI Boot Sources

USB Floppy/CD

USB Hard Drive

Windows Boot Manager

IP4 Intel® Ethernet Connection I217-LM

IP6 Intel® Ethernet Connection I217-LM

Legacy Boot Sources: Disabled

Windows Vista, Windows 7, and some Linux systems don’t support UEFI Secure Boot. For these systems, enable Legacy Support and disable Secure Boot. With Secure Boot disabled and Legacy Support enabled, note that both UEFI and legacy boot sources are available for boot. This configuration allows for the most flexibility in booting from various devices, but at the cost of not having Secure Boot.

The BIOS will base the boot sequence from the boot order list. If the first device on the boot order list is not bootable, then BIOS will try the next device. The user can permanently change the boot order by changing the F10 Boot Order. For a one- time boot order change, the user can use the Windows 8 interface to set Next Boot to a certain device. This will only be effective at the next boot.

16

Image 16
Contents Table of contents Page Uefi pre-boot guidelines Hptools for HP Uefi and pre-boot applicationsSupported models HP business notebooks HP business desktops HP workstationsHP System Diagnostics during startup Bios recoveryVolume name Uefi and custom imagingRecovery partition HPTools partition Partition ESP WinRE partition C ESP C OS partitionC Recovery partition DDirectories and descriptions Disk LayoutsFor HP-signed Uefi applications How Bios launches Uefi applicationsNon-HP-signed Uefi applications Signed pre-boot applications Pre-boot security requirements notebooks onlyAdditional F10 Policies for Pre-boot Environment Secure Boot overview Secure Boot = DisabledFirmware policies Firmware policies for notebooksFirmware boot policy for desktops and workstations Boot Mode/ Secure Boot Disable EnableSecure Boot Key management for notebooks HP Platform Key Management for notebooksSecure Boot Key management for desktops and workstations Key Ownership HP Keys Fast Boot EnabledIf Secure Boot verification fails Bios Signing KeyTPM and measured boot Physical presenceWindows 8 Hybrid Boot and flash TPM auto-provisioningPost time for notebooks Post time for desktops and workstationsBoot order Boot Order for notebooksBitLocker USBLegacy Boot Order USB Floppy USB CD-ROMSATA2 Boot order for desktops and workstationsNetwork Controller HP Bios configuration Repset functionality Bios functionalityMicrosoft Digital Marker Key injection Computrace F10 Restore Default BehaviorPhysical Presence Check Device Configurations System ConfigurationUtilities Built-In Device Options Port OptionsPage PCR boot measurements for notebook products AppendixGeneral Uefi requirements PCRFor more information Resource description Web address
Related manuals
Manual 4 pages 56.97 Kb Manual 4 pages 39.59 Kb Manual 4 pages 4.61 Kb Manual 9 pages 43 Kb Manual 4 pages 30.57 Kb Manual 208 pages 14.06 Kb

8300 specifications

The HP 8300 is a versatile and efficient desktop computer designed for business environments and power users. As part of the HP Elite series, the 8300 is tailored to deliver robust performance, security, and manageability.

One of the key features of the HP 8300 is its selection of Intel processors. Users can opt for third-generation Intel Core i3, i5, or i7 CPUs, providing a range of performance levels suitable for various workloads, from basic office tasks to more intensive applications. This adaptability makes the 8300 a suitable choice for organizations needing reliable computing power.

The system supports up to 32GB of DDR3 RAM, allowing for smooth multitasking and improved efficiency in handling resource-heavy applications. The flexibility in memory options ensures that businesses can configure the machine to meet their specific needs.

For storage, the HP 8300 offers various choices including traditional Hard Disk Drives (HDD) and Solid State Drives (SSD), significantly enhancing data access speeds and system responsiveness. With multiple configuration options, users can select from up to 1TB of storage capacity, providing ample room for files and applications.

Connectivity is also a strong point for the HP 8300. The desktop is equipped with multiple USB 3.0 ports, facilitating quick file transfers and easy peripheral connectivity. Additional ports, including USB 2.0, VGA, DP, and serial ports, ensure compatibility with a wide array of devices and legacy equipment.

Security technologies are integrated within the HP 8300 framework, including features like BIOS protection, HP Client Security, and optional fingerprint readers. These security measures help safeguard sensitive data and provide an additional layer of protection against unauthorized access.

The HP 8300 also supports various operating systems, including Windows 10 Pro, ensuring organizations can deploy the desktop within their existing IT ecosystem. Furthermore, the machine’s compatibility with HP tools for remote management enhances administrators' ability to oversee multiple devices efficiently.

In summary, the HP 8300 embodies a blend of powerful hardware, extensive configuration options, robust security features, and effective management capabilities, making it a compelling desktop solution for businesses aiming for productivity and reliability. With its comprehensive feature set, it stands out as an exceptional choice for both individual and organizational computing needs.