HP DX7500 manual Enww

Page 42

2.Slide the new drive into the hard drive cage (1), aligning the drive with the four screw holes on the cage. Install the four 6-32 standard screws that secure the hard disk drive to the hard drive cage

(2). Make sure the hard disk drive cables are facing the top of the drive cage.

NOTE: If you are replacing an old drive with a new drive, use the four retainer screws from the old drive to install the new drive.

NOTE: If you are installing a second hard drive, use four of the extra standard 6-32 screws that are installed on the interior of the front bezel. The 6-32 screws are silver. Refer to Installing Additional Drives on page 24 for an illustration of the retainer screws location.

Figure 2-31Installing the Hard Drive in the Drive Cage

36 Chapter 2 Hardware Upgrades

ENWW

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Hardware Reference Guide dx7500 Microtower Model Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Product Features Standard Configuration FeaturesServiceability Features Front Panel Components 1Front Panel ComponentsMedia Card Reader Components 2Media Card Reader ComponentsRear Panel Components 3Rear Panel Components4Keyboard Components Using the Windows Logo KeyKeyboard 5Windows Logo Key FunctionsDomain Serial Number Location 6Serial Number and Product ID LocationHardware Upgrades Removing the Computer Access Panel 1Removing the Computer Access PanelReplacing the Computer Access Panel 2Replacing the Computer Access Panel Hardware UpgradesRemoving the Front Bezel 3Removing the Front Bezel4Removing a Bezel Blank Hardware Upgrades Removing Bezel BlanksReplacing the Front Bezel 5Replacing the Front BezelInstalling Additional Memory DIMMsDDR2-SDRAM DIMMs Populating Dimm Sockets 1DIMM Socket LocationsInstalling DIMMs Enww Removing or Installing an Expansion Card 2Expansion Slot LocationsRemoving or Installing an Expansion Card 11Removing a PCI Express x1 Expansion Card Hardware Upgrades Enww Enww Drive Positions 15Drive PositionsInstalling Additional Drives 16Extra Drive Retainer Screws Location Hardware UpgradesSystem Board Drive Connections 3System Board Drive ConnectionsRemoving an Optical Drive Installing an Optical Drive into the 5.25-inch Drive Bay 19Removing the Optical DriveEnww 22Disconnecting the Diskette Drive Cables Removing an External 3.5-inch DriveEnww Installing a Drive into the 3.5-inch External Drive Bay 25Installing a 3.5-inch Device Media Card Reader ShownRemoving an Internal 3.5-inch Hard Drive Connect the appropriate drive cables 27Releasing the Hard Drive Cage Enww Installing an Internal 3.5-inch Hard Drive 30Removing the Hard DriveEnww 33Installing the Hard Drive Cage Enww Specifications Table A-1SpecificationsAppendix a Specifications Battery Replacement Type Enww Installing a Security Lock External Security DevicesCable Lock Padlock HP Business PC Security LockEnww Figure C-6Engaging the Lock Electrostatic Discharge Preventing Electrostatic DamageGrounding Methods Computer Operating Guidelines and Routine Care Safety Optical Drive PrecautionsCleaning Shipping PreparationSymbols/Numerics 1394 port 2 IndexEnww
Related manuals
Manual 47 pages 8.3 Kb Manual 12 pages 31.76 Kb Manual 3 pages 53.97 Kb Manual 4 pages 59.29 Kb
Top Page Image Contents