HP dx7300 manual Optical Drive Precautions, Shipping Preparation, Operation, Cleaning, Safety

Page 58

Optical Drive Precautions

Be sure to observe the following guidelines while operating or cleaning the optical drive.

Operation

Do not move the drive during operation. This may cause it to malfunction during reading.

Avoid exposing the drive to sudden changes in temperature, as condensation may form inside the unit. If the temperature suddenly changes while the drive is on, wait at least one hour before you turn off the power. If you operate the unit immediately, it may malfunction while reading.

Avoid placing the drive in a location that is subject to high humidity, extreme temperatures, mechanical vibration, or direct sunlight.

Cleaning

Clean the panel and controls with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Never spray cleaning fluids directly on the unit.

Avoid using any type of solvent, such as alcohol or benzene, which may damage the finish.

Safety

If any object or liquid falls into the drive, immediately unplug the computer and have it checked by an authorized HP service provider.

Shipping Preparation

Follow these suggestions when preparing to ship the computer:

1.Back up the hard drive files on PD discs, tape cartridges, CDs, or diskettes. Be sure that the backup media is not exposed to electrical or magnetic impulses while stored or in transit.

NOTE The hard drive locks automatically when the system power is turned off.

2.Remove and store all removable media.

3.Insert a blank diskette into the diskette drive to protect the drive while in transit. Do not use a diskette on which you have stored or plan to store data.

4.Turn off the computer and external devices.

5.Disconnect the power cord from the electrical outlet, then from the computer.

6.Disconnect the system components and external devices from their power sources, then from the computer.

NOTE Ensure that all boards are seated properly and secured in the board slots before shipping the computer.

7.Pack the system components and external devices in their original packing boxes or similar packaging with sufficient packing material to protect them.

52

Appendix E Computer Operating Guidelines, Routine Care and Shipping Preparation

ENWW

Image 58
Contents Hardware Reference Guide dx7300 Slim Tower Model Hardware Reference Guide About This Book About This Book Table of contents Appendix D Electrostatic Discharge Product Features Standard Configuration FeaturesDrive configuration may vary by model Front Panel ComponentsMedia Card Reader Components 2Media Card Reader ComponentsRear Panel Components 3Rear Panel ComponentsKeyboard 4Keyboard ComponentsUsing the Windows Logo Key Special Mouse Functions Serial Number LocationEnww Hardware Upgrades Serviceability FeaturesRemoving the Computer from the Stand Unlocking the Smart Cover Lock Smart Cover FailSafe KeyEnww Removing the Computer Cover 3Removing the Computer Cover4Replacing the Computer Cover Hardware Upgrades Replacing the Computer CoverDIMMs Installing Additional MemoryDDR2-SDRAM DIMMs Populating Dimm Sockets Description Socket ColorInstalling DIMMs Enww Removing or Installing an Expansion Card DescriptionEnww 9Removing an Expansion Slot Cover Enww Enww Drive Positions 13Drive PositionsInstalling and Removing Drives 14Rotating the Drive Cage Up Hardware Upgrades Removing an Optical Drive16Rotating the Drive Cage Down Installing an Optical Drive into the 5.25-inch Drive Bay 17Removing the Optical Drive19Installing the Optical Drive 21Connecting the Power and Data Cables Hardware Upgrades Removing an External 3.5-inch Drive Enww Enww Installing a Drive into the 3.5-inch External Drive Bay Enww Enww Enww 32Removing the Security Clip Hardware Upgrades 34Disconnecting the Hard Drive Power Cable and Data Cable Enww Specifications Desktop DimensionsAppendix a Specifications Battery Replacement Type Figure B-2Removing and Replacing a Coin Cell Battery Type Enww External Security Devices Installing a Security LockCable Lock Padlock Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Appendix D Electrostatic Discharge Computer Operating Guidelines and Routine Care Safety Optical Drive PrecautionsCleaning Shipping PreparationIndex Enww
Related manuals
Manual 19 pages 7.47 Kb Manual 72 pages 46.7 Kb Manual 54 pages 44.14 Kb