![](/images/new-backgrounds/1241878/24187815x1.webp)
●Replicate the system setup by saving system configuration information on diskette and restoring it on one or more computers.
●Execute
●Enable or disable DriveLock security (when supported by drive).
Using Computer Setup (F10) Utilities
Computer Setup can be accessed only by turning the computer on or restarting the system. To access the Computer Setup Utilities menu, complete the following steps:
1.Turn on or restart the computer. If you are in Microsoft Windows, click Start > Shut Down > Restart.
2.As soon as the computer is turned on, press F10 when the monitor light turns green to enter Computer Setup. Press Enter to bypass the title screen, if necessary.
NOTE: If you do not press F10 at the appropriate time, you must restart the computer and again press F10 when the monitor light turns green to access the utility.
3.Select your language from the list and press Enter.
4.A choice of five headings appears in the Computer Setup Utilities menu: File, Storage, Security, Power and Advanced.
5.Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down) keys to select the option you want, then press Enter. To return to the Computer Setup Utilities menu, press Esc.
6.To apply and save changes, select File > Save Changes and Exit.
●If you have made changes that you do not want applied, select Ignore Changes and Exit.
●To reset to factory settings or previously saved default settings (some models), select Apply Defaults and Exit. This option will restore the original factory system defaults.
CAUTION: Do NOT turn the computer power OFF while the BIOS is saving the Computer Setup (F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10 Setup screen.
Table 1 Computer Setup (F10) Utility
Heading | Table |
|
|
| |
File | Table 2 Computer | |
|
|
|
Storage | Table 3 | Computer |
|
|
|
Security | Table 4 | Computer |
|
| |
Power | Table 5 Computer | |
|
|
|
Advanced | Table 6 | Computer |
| on page 9 | |
|
|
|
Computer Setup—File
NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.
Table 2 Computer Setup—File
OptionDescription
2 Computer Setup (F10) Utility | ENWW |