Listed

TECHNICAL GUIDE

SPLIT-SYSTEM

AIR CONDITIONERS

13 SEER – R-410A – 1 PHASE

MODELS: YCJD18 THRU 60

(1.5 THRU 5 NOMINAL TONS)

Due to continuous product improvement, specifications are subject to change without notice.

Visit us on the web at www.york.com Additional rating information can be found at

www.ahridirectory.org

WARRANTY

Standard 5-year limited parts warranty. 10-year limited compressor warranty.

Extended 10-year limited parts warranty when product is registered online within 90 days of purchase for replace- ment or closing for new home construction.

561908-YTG-A-0410

DESCRIPTION

The 13 SEER Series unit is the outdoor part of a versatile cli- mate system. It is designed with a matching indoor coil compo- nent from Johnson Controls Unitary Products. Available for typical applications this climate system is supported with acces- sories and documents to serve specific functions.

FEATURES

•Quality Condenser Coils - The coil is constructed of alumi- num microchannel tubing and enhanced aluminum fins for increased efficiency and corrosion protection.

•Protected Compressor - The compressor is internally pro- tected against high pressure, temperature, and externally by a factory installed high pressure switch. This is accomplished by the simultaneous operation of high pressure relief valve and a temperature sensor which protects the compressor if undesirable operating conditions occur. A liquid line filter- drier further protects the compressor.

•Durable Finish - The cabinet is made of pre-painted steel. The pre-treated galvanized steel provides a better paint to steel bond, which resists corrosion and rust creep. Special primer formulas and matted-textured finish insure less fading when exposed to sunlight.

•Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof.

•Top Discharge - The warm air from the top mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications.

•Low Operating Sound Level - The upward air flow carries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds.

•Low Maintenance - Long life permanently lubricated motor- bearings need no annual servicing.

•Easy Service Access - Fully exposed refrigerant connec- tions, and a single panel covering the electrical controls make for easy servicing of the unit.

•Secured Service Valves - Secured re-usable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.

•U.L. and C.U.L. listed - approved for outdoor application.

•Agency Listed - U.L. and C.U.L. listed - approved for out- door application. The unit is certified in accordance with the Unitary Small Equipment certification program, which is based on ARI Standard 210/240.

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

YCJD18 THRU 60 specifications

The York YCJD18 THRU 60 is a dynamic heating, ventilation, and air conditioning (HVAC) system that incorporates advanced technology and design principles to deliver efficient climate control in commercial spaces. As part of York's heritage in the HVAC industry, this unit is engineered to meet diverse cooling and heating demands while maintaining high energy efficiency standards.

One of the main features of the YCJD series is its capacity range, which extends from 18 to 60 tons. This versatility makes it suitable for a variety of commercial applications, including office buildings, retail spaces, and educational institutions. The system utilizes a scroll compressor, known for its durability and quiet operation, ensuring that occupants experience minimal noise disruption during operation.

In terms of energy efficiency, the YCJD18 THRU 60 boasts high Seasonal Energy Efficiency Ratio (SEER) and Energy Efficiency Ratio (EER) ratings. These ratings indicate that the unit is well-equipped to handle cooling loads while consuming less energy compared to traditional HVAC systems. This not only translates to lower operational costs but also aligns with global initiatives towards sustainability and reducing carbon footprints.

The YCJD series incorporates advanced controls and monitoring technologies, allowing for precise adjustments and diagnostics. The integration of smart controls enables users to optimize system performance, schedule operations, and monitor energy usage from a remote interface. This feature enhances user experience while providing valuable insights into system efficiency and maintenance needs.

Another notable characteristic of the YCJD is its robust construction designed to withstand the rigors of various climates. The unit is typically equipped with high-quality insulation, weatherproof housing, and corrosion-resistant components, contributing to its longevity and reliability in different environments.

The installation flexibility is another strong point for the YCJD series, as it offers options for rooftop or ground-level placement. This adaptability makes it easy for HVAC professionals to customize installations to fit existing structures or new builds.

In summary, the York YCJD18 THRU 60 is a comprehensive HVAC solution designed for commercial use, featuring high energy efficiency, advanced control technologies, and robust construction. Its wide capacity range and installation versatility make it a reliable choice for maintaining comfortable indoor environments across diverse applications. With York's commitment to innovation, the YCJD series represents a significant step forward in HVAC technology, ensuring users benefit from enhanced performance and sustainability.