HP dc5800 manual 27Installing the Optical Drive

Page 39

8.Install two M3 metric guide screws in the lower holes on each side of the drive. HP has provided four extra M3 metric guide screws on the front of the chassis, under the front bezel. The M3 metric guide screws are black. Refer to Installing and Removing Drives on page 27 for an illustration of the extra M3 metric guide screws location.

CAUTION: Use only 5-mm long screws as guide screws. Longer screws can damage the internal components of the drive.

NOTE: When replacing the drive, transfer the four M3 metric guide screws from the old drive to the new one.

Figure 2-26Installing Guide Screws in the Optical Drive

9.Position the guide screws on the drive into the J-slots in the drive bay. Then slide the drive toward the front of the computer until it locks into place.

Figure 2-27Installing the Optical Drive

ENWW

Installing and Removing Drives 33

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Hardware Reference Guide dc5800 Small Form Factor Model Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Standard Configuration Features Product Features1Front Panel Components Front Panel Components2Media Card Reader Components Media Card Reader Components3Rear Panel Components Rear Panel Components4Keyboard Components Keyboard5Windows Logo Key Functions Using the Windows Logo Key6Serial Number and Product ID Location Serial Number LocationEnww Serviceability Features Hardware Upgrades1Removing the Access Panel Hardware Upgrades Removing the Computer Access Panel2Replacing the Access Panel Replacing the Computer Access PanelRemoving the Front Bezel 3Removing the Front Bezel Hardware Upgrades5Removing a 5.25-inch Bezel Blank Replace the front bezel Removing Bezel BlanksReplacing the Front Bezel 6Replacing the Front Bezel Hardware UpgradesUsing the Small Form Factor Computer in a Tower Orientation Enww Installing Additional Memory DIMMsDDR2-SDRAM DIMMs 1DIMM Socket Locations Populating Dimm SocketsInstalling DIMMs Enww 2Expansion Slot Locations Removing or Installing an Expansion CardEnww 14Removing a Standard PCI Expansion Card Enww Enww 3Drive Positions Drive Positions19Secondary Hard Drive 6-32 Guide Screws Location Installing and Removing DrivesEnww 4System Board Drive Connections System Board Drive Connections Removing an Optical Drive 24Rotating the Drive Cage Down 25Removing the Optical Drive Installing an Optical Drive into the 5.25-inch Drive Bay27Installing the Optical Drive Enww Removing an External 3.5-inch Drive Enww Installing a Drive into the 3.5-inch External Drive Bay Enww Enww Enww 39Installing Hard Drive Guide Screws Enww 42Removing the Thermal Sensor Removing and Replacing a Removable 3.5-inch Sata Hard DriveEnww Enww Enww Table A-1Specifications SpecificationsAppendix a Specifications Battery Replacement Type Enww Enww Installing a Security Lock External Security DevicesCable Lock Padlock HP Business PC Security Lock Enww Front Bezel Security Figure C-7Installing the Front Bezel Security ScrewEnww Electrostatic Discharge Preventing Electrostatic DamageGrounding Methods Appendix D Electrostatic Discharge Computer Operating Guidelines and Routine Care Shipping Preparation Optical Drive PrecautionsCleaning SafetyIndex Enww
Related manuals
Manual 69 pages 9.05 Kb Manual 4 pages 56.15 Kb Manual 62 pages 26.82 Kb Manual 27 pages 18.08 Kb
Top Page Image Contents