HP dc5750 manual Enww

Page 31

b.If you are removing a diskette drive, disconnect the data cable (1) and power cable (2) from the back of the drive.

Figure 2-16Disconnecting the Diskette Drive Cables

7.A latch drive bracket with release tabs secures the drives in the drive bay. Lift the release tab on the latch drive bracket (1) for the drive you want to remove, then slide the drive from its drive bay

(2).

Figure 2-17Removing the External Drives

8.Remove the four guide screws (two on each side) from the old drive. You will need these screws to install a new drive.

ENWW	Installing Additional Drives 25

Image 31

Contents Hardware Reference Guide dc5750 Microtower Model Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Standard Configuration Features Product FeaturesFront Panel Components Drive configuration may vary by model2Rear Panel Components Rear Panel Components3Keyboard Components KeyboardUsing the Windows Logo Key Serial Number Location Special Mouse FunctionsServiceability Features Hardware Upgrades1Removing the Computer Access Panel Hardware Upgrades Removing the Computer Access Panel2Replacing the Computer Access Panel Replacing the Computer Access PanelRemoving the Front Bezel 3Removing the Front Bezel Hardware Upgrades4Replacing the Front Bezel Replacing the Front BezelDIMMs Installing Additional MemoryDDR2-SDRAM DIMMs Description Socket Color Populating Dimm SocketsInstalling DIMMs Enww Description Removing or Installing an Expansion CardRemoving or Installing an Expansion Card 9Removing an Expansion Slot Cover Hardware Upgrades 11Removing a PCI Express x16 Expansion Card 12Installing an Expansion Card Hardware Upgrades Enww 14Drive Positions Drive PositionsInstalling Additional Drives Removing an External 5.25-inch or 3.5-inch Drive 15Disconnecting the Optical Drive Cables Hardware UpgradesEnww Installing an External 5.25-inch or 3.5-inch Drive Enww Enww Removing an Internal 3.5-inch Hard Drive 23Disconnecting the Hard Drive CablesEnww 27Sliding a Hard Drive into the Drive Bay Installing an Internal 3.5-inch Hard DriveEnww Power Supply 115V 230V SpecificationsRated Input Current maximum1 Battery Replacement Type Figure B-2Removing and Replacing a Coin Cell Battery Type Enww External Security Devices Installing a Security LockCable Lock Padlock Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Appendix D Electrostatic Discharge Computer Operating Guidelines and Routine Care Shipping Preparation Optical Drive PrecautionsCleaning SafetyIndex Enww

Related manuals

Manual 62 pages 42.78 Kb

Manual 72 pages 24 Kb