Table A-1 Specifications (continued)
Rated Line Frequency | |||||
|
|
| |||
Power Output | 300 W | 300 W | |||
|
|
|
|
|
|
Rated Input Current (maximum)1 |
|
|
|
|
|
Standard PS | 8A | @ | 100 VAC | 4A @ | 200 VAC |
80 Plus PS | 4A | @ | 100VAC | 2A @ | 200VAC |
1The standard power supply utilizes a passive power factor corrected power supply. The power factor correction is present in the 230V operating mode only. This allows the system to pass the CE mark requirements for use in the countries of the European Union. This supply requires the use of an input voltage range select switch. The 80 Plus power supply utilizes an active power factor corrected power supply. This allows the system to pass the CE mark requirements for use in the countries of the European Union. The active power factor corrected power supply also has the added benefit of not requiring an input voltage range select switch.
42 Appendix A Specifications | ENWW |