HP dc5700 manual Installing DIMMs

Page 23

one channel should be populated with the 1GB DIMM and one 256MB DIMM and the other channel should be populated with the two 512MB DIMMs. With this configuration, 2 GB will run as dual channel and 256 MB will run as single channel.

In any mode, the maximum operational speed is determined by the slowest DIMM in the system.

Installing DIMMs

CAUTION You must disconnect the power cord and wait approximately 30 seconds for the power to drain before adding or removing memory modules. Regardless of the power-on state, voltage is always supplied to the memory modules as long as the computer is plugged into an active AC outlet. Adding or removing memory modules while voltage is present may cause irreparable damage to the memory modules or system board. If you see an LED light on the system board, voltage is still present.

The memory module sockets have gold-plated metal contacts. When upgrading the memory, it is important to use memory modules with gold-plated metal contacts to prevent corrosion and/or oxidation resulting from having incompatible metals in contact with each other.

Static electricity can damage the electronic components of the computer or optional cards. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. For more information, refer to Appendix D, Electrostatic Discharge.

When handling a memory module, be careful not to touch any of the contacts. Doing so may damage the module.

NOTE You must remove the optical drive to add or remove memory modules.

1.Remove/disengage any security devices that prohibit opening the computer.

2.Remove all removable media, such as diskettes or compact discs, from the computer.

3.Turn off the computer properly through the operating system, then turn off any external devices.

4.Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION You must disconnect the power cord and wait approximately 30 seconds for the power to drain before adding or removing memory modules. Regardless of the power- on state, voltage is always supplied to the memory modules as long as the computer is plugged into an active AC outlet. Adding or removing memory modules while voltage is present may cause irreparable damage to the memory modules or system board. If you see an LED light on the system board, voltage is still present.

5.If the computer is on a stand, remove the computer from the stand.

6.Remove the access panel.

7.Locate the memory module sockets on the system board.

WARNING! To reduce risk of personal injury from hot surfaces, allow the internal system components to cool before touching.

8.Disconnect the power and data cables from the back of the optical drive.

ENWW

Installing Additional Memory 17

Image 23
Contents Hardware Reference Guide dc5700 Small Form Factor Model Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Standard Configuration Features Product FeaturesFront Panel Components Drive configuration may vary by model2Rear Panel Components Rear Panel Components3Keyboard Components KeyboardUsing the Windows Logo Key Serial Number Location Special Mouse FunctionsServiceability Features Hardware UpgradesUsing the Small Form Factor Computer in a Tower Orientation Using the Small Form Factor Computer in a Tower Orientation 2Removing the Computer Access Panel Hardware Upgrades Removing the Computer Access Panel3Replacing the Computer Access Panel Replacing the Computer Access PanelRemoving the Front Bezel 4Removing the Front Bezel Hardware Upgrades5Removing a Bezel Blank Replace the front bezel Removing Bezel BlanksReplacing the Front Bezel 6Replacing the Front Bezel Hardware UpgradesDDR2-SDRAM DIMMs Installing Additional MemoryDIMMs Description Socket Color Populating Dimm SocketsInstalling DIMMs 9Rotating Optical Drive Retainer Up Hardware Upgrades Enww 11Expansion Slot Locations Removing or Installing an Expansion Card12Removing the Expansion Slot Retainer 13Removing an Expansion Slot Cover Hardware Upgrades 15Removing a ADD2/SDVO Expansion Card 16Installing an Expansion Card Hardware Upgrades Replace the slot cover retainer 18Drive Positions Drive PositionsInstalling and Removing Drives Removing an Optical Drive 20Removing the Optical Drive 22Installing the Optical Drive Hardware Upgrades Enww Removing a Diskette Drive 24Disconnecting the Diskette Drive Cables Hardware Upgrades26Removing the Diskette Drive Enww 29Installing a Diskette Drive Enww Enww 32Disengaging the Diskette Drive Hardware Upgrades 34Disconnecting the Hard Drive Power Cable and Data Cable Enww Enww Enww Power Supply 115V 230V SpecificationsRated Input Current maximum1 Battery Replacement Type Figure B-2Removing and Replacing a Coin Cell Battery Type Enww Cable Lock Installing a Security LockExternal Security Devices Padlock Grounding Methods Electrostatic DischargePreventing Electrostatic Damage Appendix D Electrostatic Discharge Computer Operating Guidelines and Routine Care Shipping Preparation Optical Drive PrecautionsCleaning SafetyIndex Enww
Related manuals
Manual 18 pages 34.13 Kb Manual 31 pages 41.06 Kb Manual 19 pages 31.97 Kb Manual 52 pages 39.82 Kb Manual 38 pages 3.87 Kb

dc5700 specifications

The HP dc5700 is a versatile business desktop designed to meet the needs of various professional environments. Aimed at small to medium-sized enterprises, the dc5700 is known for its solid performance, reliability, and expandability, making it a suitable choice for users who require a robust system.

One of the standout features of the dc5700 is its Intel Core 2 Duo processor options, which deliver efficient multitasking capabilities and impressive performance for everyday applications. Users can choose from various configurations, allowing them to tailor the machine to their specific requirements. The availability of multiple processor options ensures that the dc5700 can handle demanding applications while maintaining smooth operation.

In terms of memory, the dc5700 supports up to 8GB of DDR2 RAM, providing ample capacity for running multiple applications simultaneously without significant slowdowns. The system's memory can be easily upgraded, thanks to the accessible design, which appeals to businesses looking for long-term usability and performance enhancements.

Storage is another area where the dc5700 shines. It offers a range of hard drive options, including SATA drives with capacities that can reach up to 500GB. This flexibility allows users to select a storage solution that aligns with their data requirements, whether they need faster access speeds or larger capacities for storing extensive databases.

The dc5700 also emphasizes connectivity, featuring multiple USB ports, Ethernet, and audio connections. This ensures compatibility with a wide array of peripherals and accessories, enabling users to create a well-integrated workspace. Additionally, the desktop includes an integrated Intel Graphics Media Accelerator, providing adequate visual performance for everyday tasks and multimedia playback.

Security features are also significant in the dc5700. It incorporates HP's trusted platform module, which enhances data protection through encryption and secure authentication, making it ideal for businesses that handle sensitive information.

Overall, the HP dc5700 combines performance, expandability, and reliability in a compact desktop format. Its powerful processor options, expandable memory and storage, and robust security features make it an excellent choice for professionals seeking a dependable workstation that can adapt to changing business needs. With the HP dc5700, users get a solid desktop solution that can effectively support their demanding workflows.