Maintenance, Cleaning the air filter | York MLCA-MLHA-07-24 manual

MAINTENANCE

Household

Drain

Cleaner No

Filter Handle

WARNING

It is necessary to stop the air conditioner and disconnect the power supply before cleaning.

■Cleaning the indoor unit and remote controller

CAUTION

•Use a dry cloth to wipe the indoor unit and remote controller.

•A cloth dampened with cold water may be used on the indoor unit if it is very dirty.

•The front panel of the indoor unit can be removed and cleaned with water. Then wipe it with a dry cloth.

•Do not use a chemically treated cloth or duster to clean the unit.

•Do not use benzine, thinner, polishing powder, or similar solvents for cleaning. These may cause the plastic surface to crack or deform.

■Cleaning the air filter

A clogged air filter reduces the cooling efficiency of this unit. Please clean the filter once every 2 weeks.

1.Lift the indoor unit panel up to an angle until it stops with a clicking sound.

2.Take hold of the handle of the air filter and lift it up slightly to take it out from the filter holder, then pull it downwards.

3.Remove the AIR FILTER from the indoor unit.

•Clean the AIR FILTER once two weeks.

•Clean the AIR FILTER with a vacuum cleaner or water, then dry it up in cool place.

4.Remove the Electrostatic Filter from its support frame as shown in the Figure on the left (Not applicable to the units without electrostatic filter).

Do not touch this Electrostatic Filter within 10 minutes after opening the inlet grille, it may cause an electric shock.

•Clean the Electrostatic Filter with mild detergent or water and dry in the sunlight for two hours.

•Before re-install the Electrostatic Filter, check whether the corona line or support frame is damaged or not.

5.Install the AIR FILTER back into position.

6.Insert the upper portion of the AIR FILTER back into the unit taking care that the left and right edges line up correctly and place filter into position.

■Maintenance

If you plan to idle the unit for a long time, perform the following:

(1)Operate the fan for about half a day to dry the inside of the unit.

(2)Stop the air conditioner and disconnect power. Remove the batteries from the remote controller.

(3)The outdoor unit requires periodic maintenance and cleaning. Do not attempt to do this yourself.

Contact your dealer or servicer.

■Checks before operation

•Check that the wiring is not broken off or disconnected.

•Check that the air filter is installed.

•Check if the air outlet or inlet is blocked after the air conditioner has not been used for a long time.

CAUTION

•Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling sharp metal edges.

•Do not use water to clean inside the air conditioner.

Exposure to water can destroy the insulation, leading to possible electric shock.

•When cleaning the unit, first make sure that the power and circuit breaker are turned off.

ENGLISH 15

J199.pmd

31/03/2005, 9:54 PM

MLCA-MLHA-07-24 specifications

York MLCA-MLHA-07-24 is a high-efficiency, cutting-edge variable refrigerant flow (VRF) system designed for both commercial and residential applications. This air conditioning solution embodies the latest advancements in HVAC technology, presenting significant energy-saving capabilities, versatile installation options, and enhanced user comfort.

One of the standout features of the York MLCA-MLHA-07-24 is its advanced inverter compressor technology. This technology allows the system to adjust its cooling or heating output based on the specific demands of the space, ensuring optimal energy use and maintaining desired indoor temperatures. By varying the compressor speed, the unit minimizes wear and tear on components, leading to a longer operational lifespan and reduced maintenance needs.

Another key characteristic of the MLCA-MLHA-07-24 is its multi-zone capability, which allows for efficient climate control in multiple rooms or areas. This flexibility permits individual temperature settings for different spaces, enhancing comfort for occupants while optimizing energy consumption. The system can support several indoor units connected to a single outdoor unit, making it ideal for various building layouts and sizes.

In terms of efficiency, the York MLCA-MLHA-07-24 boasts an impressive SEER (Seasonal Energy Efficiency Ratio) rating, which is indicative of its ability to cool spaces with minimal energy use. This promotes not only lower utility bills for end users but also contributes to a reduced carbon footprint, making it an environmentally friendly option in HVAC systems.

The system is also designed with quiet operation in mind. It features sound-dampening technologies that significantly lower noise levels, making it suitable for use in noise-sensitive environments. This is particularly beneficial in commercial settings such as offices, restaurants, and healthcare facilities where a peaceful atmosphere is essential.

Furthermore, the MLCA-MLHA-07-24 incorporates advanced controls with smart technology compatibility. Users can easily manage their indoor climate through mobile apps or smart home systems, providing convenience and the ability to monitor energy usage in real-time. This capability is rapidly becoming a necessity as energy management and sustainability become more significant priorities for consumers and businesses alike.

In conclusion, the York MLCA-MLHA-07-24 represents a synthesis of innovation, efficiency, and user-friendly operation. Its key technologies and characteristics make it a prime choice for those seeking to enhance their indoor environments through sophisticated HVAC solutions that prioritize comfort, sustainability, and convenience.