HP 8200 manual Password Security, System Board

Boards

Boards, Memory, Processors

1	System board (includes replacement thermal material)	655876-001
2	Converter board	668170-001
3	Sidekey board	663348-001
4	Webcam, 1.3MP with analog microphone	663354-001
*	Memory module, 2 GB (PC3-10600, CL9, SODIMM)	646800-001
*	Memory module, 4 GB (PC3-10600, CL9, SODIMM)	646801-001
Processors (include thermal replacement material)
*	Intel Core i7 2600S processor, 2.8 GHz, 65W	638419-001
*	Intel Core i5 2500T processor, 2.3 GHz, 45W	663350-001
*	Intel Core i5 2500S processor, 2.7 GHz, 65W	638420-001
*	Intel Core i5 2400S processor, 2.5 GHz, 65W	640953-001
*	Intel Core i5 2390 processor, 2.7 GHz, 35W	663349-001
*	Intel Core i3 2120 processor, 3.3 GHz, 65W	638629-001
*	Intel Core i3 2105 processor, 3.1 GHz, 65W	655970-001
*	Intel Core i3 2100 processor, 3.1 GHz, 65W	638628-001
*	Intel Pentium Dual-Core G850 processor, 2.9 GHz, 65W	655973-001
*	Intel Pentium Dual-Core G840 processor, 2.8 GHz, 65W	655972-001
*	Intel Pentium Dual-Core G620 processor, 2.6 GHz, 65W	655971-001

* Not shown

Password Security

Establishing a Setup or Power-On password:

1.Turn on or restart the computer.

2.As soon as the computer turns on, press the Esc key while “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen.

3.Press the F10 key to enter Computer Setup.

4.To establish Setup password, select Security > Setup Password and follow the

instructions. - or -

To establish a Power-On password, select Security > Power-On Password and follow the instructions on the screen

5.Before exiting, click File > Save Changes and Exit.

Resetting a Setup or Power-On password:

1.Turn off the computer and disconnect the power cord from the power outlet.

2.Remove the access panel.

3.On the system board, locate the header labeled PSWD.

4.Remove the jumper from the header.

5.Replace the jumper.

6.Replace the access panel and reconnect the power cord.

7.Turn on the computer and allow it to start.

Clearing CMOS

1.Turn off the computer and disconnect the power cord from the power outlet.

2.Remove the access panel.

3.On the system board, press and hold the CMOS button for 5 seconds.

4.Replace the chassis access panel and reconnect the power cord.

5.Turn on the computer and allow it to start.

System Board

Miscellaneous Parts

Miscellaneous Parts

1	CPU blower/fan assembly (includes two fans)	663353-001
2	Heat sink/thermal module (includes replacement thermal material)	663351-001
3	Speaker, right	663355-001
3	Speaker, left	663356-001
4	Grommet, rubber, hard drive	663357-001
*	Bezel, optical drive	663364-001
*	802.11a/b/g/n WLAN PCIe card	652165-001
*	Combo Bluetooth 2.1 and 802.11a/b/g/n WLAN PCIe card	652279-001
*	Mouse, optical, USB	596410-001
*	Mouse, wireless	621417-001
*	Mouse, optical, USB, black	537749-001
*	Mouse, USB, PS2, washable	608150-001

*Not shown

System Board Connectors and Jumpers

PROCESSOR	Processor socket	SPKR R	Right speaker connector
LVDS1	Display connector	SPKR L	Left speaker connector
VGA	Display connector	PB/LED	Power switch/LED
X1PCIEXP1	PCIe X1 slot (WLAN)	SATA PWR0	Hard drive power
CARD	Card reader	SATA0	Hard drive data
READER
COMA	Diskette drive connector	CMOS	CMOS reset button
USB	USB connectors (2)	SATA1	Optical drive data
MIC	Microphone connector	SATA PWR1	Optical drive power
HDPH	Headphone connector	BATTERY	RTC battery slot
USB	USB connectors (4)	DIMM1	Memory socket - Ch A
CHFAN	Main fan connector	DIMM3	Memory socket - Ch B
OUT	Audio out connector	CHFAN	Fan connector
RJ45	Network connector	WEBCAM	Camera connector
PWR	External power connector	INV POWER	Converter power con-
			nector
PSWD	Password header

HP Compaq 8200 Elite AIO 670569-001 page 2