HP 6005 Pro manual Execute Memory Test, Bios Power-On, Onboard Devices, PCI Devices, Bus Options

Table 6 Computer Setup—Advanced (for advanced users) (continued)

Option	Description
	NOTE: If you turn off power to the computer using the switch on a power strip, you will not be able
	to use the suspend/sleep feature or the Remote Management features.
	● POST Delay (None, 5, 10 15, or 20 seconds). Enabling this feature will add a user-specified
		delay to the POST process. This delay is sometimes needed for hard disks on some PCI cards
		that spin up very slowly, so slowly that they are not ready to boot by the time POST is finished.
		The POST delay also gives you more time to select F10 to enter Computer (F10) Setup.
	● Bypass F1 Prompt. This feature allows the system to boot without pressing F1 at the prompt
		when the configuration changes.
Execute Memory Test	Restarts the computer and executes the POST memory test.
(some models)
BIOS Power-On	Allows you to set the computer to turn on automatically at a time you specify.
Onboard Devices	Allows you to set resources for or disable onboard system devices (serial port or parallel port).
PCI Devices	● Lists currently installed PCI devices and their IRQ settings.
	● Allows you to reconfigure IRQ settings for these devices or to disable them entirely. These
		settings have no effect under an ACPI-based operating system.
PCI VGA Configuration	Displayed only if there are one or more PCI graphics controllers in the system and the integrated
	video is enabled. Allows you to specify which VGA controller will be the “boot” or primary VGA
	controller.
	NOTE: In order to see this entry, you must enable Integrated Video (Advanced > Device
	Options) and Save Changes and Exit.
Bus Options	On some models, allows you to enable or disable:
	●	PCI SERR# generation.
	● PCI VGA palette snooping, which sets the VGA palette snooping bit in PCI configuration space;
		only needed when more than one graphics controller is installed.
Device Options	Allows you to set:
	● Printer mode (Bi-Directional, EPP + ECP, Output Only).
	● Num Lock state at power-on (off/on).
	● S5 Wake on LAN (enable/disable).
		◦	To disable Wake on LAN during the off state (S5), use the arrow (left and right) keys to
			select the Advanced > Device Options menu and set the S5 Wake on LAN feature to
			Disable. This obtains the lowest power consumption available on the computer during
			S5. It does not affect the ability of the computer to Wake on LAN from suspend or
			hibernation, but will prevent it from waking from S5 via the network. It does not affect
			operation of the network connection while the computer is on.
		◦	If a network connection is not required, completely disable the network controller (NIC) by
			using the arrow (left and right) keys to select the Security > Device Security menu. Set
			the Network Controller option to Device Hidden. This prevents the network controller
			from being used by the operating system and reduces the power used by the computer
			in S5.
	●	Processor cache (enable/disable).
	● Multi-Processor (enable/disable). This option may be used to disable multi-processor support
		under the OS.

● Integrated Graphics Memory Size (Automatic, 32M, 64M, 128M, 256M). This allows the user to control the size of the memory used by the integrated graphics controller. Automatic allows

12 Computer Setup (F10) Utility ENWW