| Antenna Assembly |
TV36 | TV36 |
Large Boom
Small Boom
Reflector Booms
Mast
34
Antenna Assembly (continued)
1.Unfold the elements on the two reflector booms until they lock into place. Make sure that they are straight and perpendicular to the boom.
2.Attach the two reflector booms using the attached nut and bolt so that they are perpendicular to the smaller boom. (See figure 1.)
Fig. 1
3.Unfold the reflector booms until they lock into place. (See figure 2.)
Fig. 2
4.Unfold all the other elements on the antenna until they lock into place ensuring that they are flat and parallel to each other. (See figure 3.)
Fig. 3