HP 600B Feature Function Default Setting If applicable, Bios, Security Menu Administrator Tools

Feature		Function	Default Setting,
			if applicable
System Diagnostics		Provides access to diagnostic features, such as the start-up	N/A
		test, run-in test, and hard disk test
∙	System Information	Provides system information, such as serial number, model,	N/A
		CPU, and memory
∙	Start-Up Test	Runs diagnostics on memory and storage	N/A
∙	Run-In Test	Performs a continuous diagnostics check on memory and hard	N/A
		disk
∙ Hard Disk Test (non HP image)		Performs a hard drive diagnostics check	N/A
∙	Hard Disk Test (HP image)	Performs a memory test, battery test, and system tune-up, as	N/A
		well as providing BIOS management, an error log, and
		language options
Update System BIOS		Updates system firmware from the FAT 32 partition on the	N/A
		hard drive or from a USB Disk-on-key
Create a backup image of the System		Puts an image of the System BIOS on the HP_TOOLS partition.	N/A
BIOS		Does not work if a BIOS administrator has been set
Restore Defaults		Restores F10 settings to factory defaults	N/A
Reset BIOS security to factory default		Resets BIOS and Protect Tool Users, clears fingerprint tokens,	N/A
		and resets the TPM
Ignore Changes and Exit		Exits F10 Setup without saving any changes made during the	N/A
		current session
Save Changes and Exit		Exits F10 Setup and saves all changes made during the	N/A
		current session
		Security Menu
Administrator Tools
Setup BIOS Administrator Password		Establishes a power-on password that grants Administrator	N/A
		privileges
User Management		Manages BIOS and ProtectTools users	N/A
		(creates/deletes/resets passwords)
∙	Create New BIOS User Account	Creates additional BIOS user accounts.	N/A
		Enables the administrator to specify User ID Privilege level.
		Creates passwords set to User ID by default, but individual
		users can change their assigned password.
Password Policy		Allows the selection of various rules to govern BIOS password	N/A
		authentication 5
∙	Password Minimum Length	Allows the administrator to specify the minimum number of	N/A
		characters required for the F10 power-on password
∙	At least one symbol required	Allows the administrator to require at least one symbol, such	Disabled
		as $, %, ^, &, or #, for the F10 power-on password
∙	At least one number required	Allows the administrator to require at least one number, such	Disabled
		as 1, 2, or 3, for the F10 power-on password
∙ At least one uppercase character		Allows the administrator to require at least one uppercase	Disabled
	required	character, such as A, B, C, or D, for the F10 power-on
		password
∙ At least one lowercase character		Allows the administrator to require at least one lowercase	Disabled
	required	character, such as a, b, c, or d, for the F10 power-on password
∙	Are spaces allowed in Password?	Allows the administrator to permit spaces, such as New York,	Disabled
		in the F10 power-on password

5A BIOS Administrator password is required.

4