HP dc72 Client manual Enww

Page 43

10.Reconnect the power cord and turn on the computer.

11.Lock any security devices that were disengaged when the computer cover was removed.

Removing and Replacing the Primary 3.5-inch Internal SATA Hard Drive

NOTE The system does not support Parallel ATA (PATA) hard drives.

Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you can transfer the data to the new hard drive. Also, if you are replacing the primary hard drive, make sure you have theRestore Plus! CD set that you created when you initially set up the computer to restore the operating system, software drivers, and any software applications that were preinstalled on the computer. If you do not have this CD set, create it now. Refer to the HP Backup and Recovery Manager User Guide in the Windows Start menu for more information. You may wish to print this guide for easy reference.

The preinstalled 3.5-inch hard drive is located under the power supply. To remove and replace the hard drive:

1.Remove/disengage any security devices that prohibit opening the computer.

2.Remove all removable media, such as diskettes or compact discs, from the computer.

3.Turn off the computer properly through the operating system, then turn off any external devices.

4.Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer.

5.If the computer is on a stand, remove the computer from the stand.

6.Remove the computer cover.

CAUTION After removing the computer cover, look for the LED on the system board between the DIMM sockets. If the LED is illuminated, the system still has power. Turn off the computer and remove the power cord before proceeding.

ENWW

Installing and Removing Drives 37

Page 42 Page 44
Image 43
Page 42 Page 44
Contents HP Compaq Business PC Hardware Reference Guide About This Book About This Book Table of contents Appendix D Electrostatic Discharge Standard Configuration Features Product FeaturesFront Panel Components Drive configuration may vary by model2Media Card Reader Components Media Card Reader Components3Rear Panel Components Rear Panel Components4Keyboard Components KeyboardUsing the Windows Logo Key Serial Number Location Special Mouse FunctionsEnww Serviceability Features Hardware UpgradesUsing the Small Form Factor Computer in a Tower Orientation Smart Cover FailSafe Key Unlocking the Smart Cover LockEnww 3Removing the Computer Cover Removing the Computer CoverReplacing the Computer Cover 4Replacing the Computer Cover Hardware UpgradesDIMMs Installing Additional MemoryDDR2-SDRAM DIMMs Description Socket Color Populating Dimm SocketsInstalling DIMMs Enww Description Removing or Installing an Expansion CardEnww 9Removing an Expansion Slot Cover Enww Enww 13Drive Positions Drive PositionsInstalling and Removing Drives Removing an Optical Drive 14Rotating the Drive Cage Up Hardware Upgrades16Rotating the Drive Cage Down 17Removing the Optical Drive Installing an Optical Drive into the 5.25-inch Drive Bay19Installing the Optical Drive 21Connecting the Power and Data Cables Hardware Upgrades Removing an External 3.5-inch Drive Enww Enww Installing a Drive into the 3.5-inch External Drive Bay Enww Enww Enww 32Removing the Security Clip Hardware Upgrades 34Disconnecting the Hard Drive Power Cable and Data Cable Enww Desktop Dimensions SpecificationsAppendix a Specifications Battery Replacement Type Figure B-2Removing and Replacing a Coin Cell Battery Type Enww External Security Devices Installing a Security LockCable Lock Padlock Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Appendix D Electrostatic Discharge Computer Operating Guidelines and Routine Care Shipping Preparation Optical Drive PrecautionsCleaning SafetyIndex Enww
Top Page Image Contents