HP w1707 manual Preparing the column-base monitor for wall-mounting

Page 16

Setting Up the Monitor

Preparing the column-base monitor for wall-mounting

1.Disconnect the power cable and any other cables from the monitor.

2.With the monitor screen face-down on a flat, soft surface, remove the monitor base. Refer to “Removing the Monitor Base.”

3.Remove the hinge cover and set it aside. Three screws and the hinge are exposed.

4.Holding the pedestal so that it cannot fall, remove the single screw that is close to the hinge, and then remove the other two screws. If necessary, move the pedestal, so that all three screws are accessible.

5.Slide the pedestal off the monitor panel.

6.Save the removed items (screws, hinge cover, pedestal, and base) for future use.

7.Follow the instructions that are included with the mounting fixture to ensure that the monitor is safely attached.

The four-threaded mounting holes that are on the back of the panel are compliant with the VESA standard for mounting flat-panel monitors. The vp15 monitor uses the 75 mm spacing standard, while the other models use the 100 mm spacing standard.

Use the four holes to attach a swing arm or other mounting fixture.

Reinstalling the desktop pedestal and base for the monitor

1.Remove the mounting fixture.

2.Reverse the preceding instructions.

3–6

User’s Guide

Page 15 Page 17
Image 16
Page 15 Page 17
Contents User’s Guide USA Notational Conventions User’s Guide Contents Troubleshooting Technical Specifications Operating the MonitorPreparing the Monitor for Shipping Agency Regulatory NoticesFeatures Product FeaturesHP LCD Monitors Base Designs Important Safety Information Safety and Maintenance GuidelinesSafety Precautions Maintenance Guidelines Cleaning the MonitorSetting Up the Monitor Installing the MonitorInstalling on a Desktop Unpacking the MonitorUnfolding the double-hinged monitor Assembling the cantilever base Assembling the column baseWall-Mounting the Monitor Mounting Fixture not Supplied Preparing the double-hinged monitor for wall-mountingPreparing the cantilever-base monitor for wall-mounting Reinstalling the desktop pedestal and base for the monitor Preparing the column-base monitor for wall-mountingConnecting the VGA Analog or DVI-D Digital Cable Connecting the Hdmi CableTo connect the VGA cable To connect the DVI-D cableAudio and Video Cables and Adapters Cable/Adapter Name DescriptionConnecting the USB Hub Cable Connecting the Audio CableConnecting USB Devices to the Monitor Connecting the Power Cable Connecting the power cableCable Management Adjusting the Tilt Adjusting the Swivel Select Models Only Adjusting the Height Select Models OnlyPivoting the Monitor Select Models Only Ambient Light Sensor Select Models Only Keyboard ParkingSetting Up the Monitor Installing Drivers Using the Auto-Adjustment FunctionDownloading Updated Drivers from the Internet Operating the MonitorSelect Open Auto-Adjustment Software My Display SoftwareUsing the Onscreen Display OSD Front-Panel ControlsOSD Menu Selections Main Menu Icon Options Submenu Options DescriptionIcon Main Menu Submenu Options Description Sets your own blue color levelsTop Adjusting Screen Quality Selecting Video Input ConnectorsIdentifying Monitor Conditions High-Bandwidth Digital Content Protection Hdcp Power-Saver FeatureOptimizing Analog Video Removing the Monitor Base Preparing the Monitor for ShippingRemoving the cantilever base Removing the column base Removing the column baseFolding the Double-Hinged Monitor Preparing the Monitor for Shipping Solving Common Problems TroubleshootingProblem Solution Locating the Rating Label No Plug and PlayTechnical Specifications Specifications Model vp15Specifications Model vp17 Model vp19Specifications Model FP1707 Model WF1907Specifications Model w1707 Model w1907Specifications Model w2007 Model w2207Specifications Model w2408 Preset Video Modes W1707 supports preset modes 1 throughWF1907 and w1907 support preset modes 1 through W2007 supports preset modes 1 through W2408 supports preset modes 1 through Power Cord Set Requirements LCD Monitor Quality and Pixel PolicyTechnical Specifications Agency Regulatory Notices Federal Communications Commission NoticeModifications CablesMaterials Disposal Canadian NoticeAvis Canadien European Union Regulatory NoticeKorean Notice EPA Energy Star Compliance HP Recycling Program#$%&*+

w1707 specifications

The HP w1707 is a notable 17-inch LCD monitor that combines functionality and performance, making it a valuable addition to any office or home setup. Known for its sleek design and user-friendly features, this monitor has garnered attention since its release.

One of the main features of the HP w1707 is its 1280 x 1024 native resolution, which ensures crisp and clear visuals for various applications, from everyday tasks like browsing and word processing to more graphic-intensive activities. The display technology used here is LCD, which offers reliable performance, lower energy consumption, and a compact design compared to traditional CRT monitors.

The monitor provides an impressive 5ms response time, which is critical for users who play fast-paced video games or watch action-packed movies. This low response time minimizes motion blur, ensuring a clear display even during rapid movements. Additionally, the HP w1707 boasts a contrast ratio of 600:1 and a brightness level of 300 cd/m², which contribute to vibrant colors and detailed images.

Connectivity options are also a strong point of the HP w1707. The monitor is equipped with a VGA port, making it compatible with a wide range of computers and laptops. This versatility ensures that users can easily integrate the monitor into their existing setups without the need for additional adapters.

Moreover, the HP w1707 features tilt adjustments,allowing users to change the viewing angle according to their comfort. This adaptability is important for reducing eye strain during prolonged use. The monitor’s flat-panel design not only saves desk space but also complements modern aesthetics in any workspace.

Energy efficiency is another characteristic that stands out in this model. The HP w1707 is compliant with Energy Star standards, which means it is designed to consume less power while still delivering excellent performance. This not only helps save on electricity bills but also contributes to a more sustainable approach to technology.

In conclusion, the HP w1707 is an effective and dependable monitor that caters to a wide array of users. With its solid features, responsive technology, versatile connectivity, and energy efficiency, it remains a relevant choice for anyone seeking a reliable display solution. Whether for work or entertainment, the HP w1707 successfully meets the demands of modern computing.
Top Page Image Contents