York CU060, CH060 manual Model

Page 7

Unitary Products Group

7

TABLE 4: SUPPLY AIR BLOWER PERFORMANCE CH060-120, 5 TO 10 TON HORIZONTAL MODELS

										EXTERNAL STATIC PRESSURE - Inches W.C.

MODEL	SUPPLY	0.2			0.4			0.6			0.8			1.0			1.2				1.4			1.6			1.8

#	CFM	RPM		BHP	RPM		BHP	RPM		BHP	RPM		BHP	RPM		BHP	RPM		BHP		RPM		BHP	RPM		BHP	RPM		BHP

	1800	846		0.41	936		0.48	1024		0.56	1107		0.64	1195		0.74	1259		0.82		1325		0.90	1400		0.99	-		-

CH060	2000	917		0.54	999		0.62	1079		0.71	1157		0.79	1233		0.89	1305		0.98		-		-	-		-	-		-

	2200	994		0.70	1069		0.79	1142		0.88	1214		0.98	-		-	-		-		-		-	-		-	-		-

	3000	810		0.65	900		0.78	986		0.91	1066		1.04	1143		1.17	1221		1.32		1294		1.48	1363		1.63	1433		1.79

CH096	3200	851		0.78	938		0.91	1018		1.04	1095		1.18	1170		1.32	1236		1.42		1305		1.56	1380		1.74	1447		1.90

	3400	892		0.91	974		1.05	1051		1.19	1125		1.33	1196		1.48	1266		1.64		1320		1.81	1390		1.90	-		-

	3600	927		1.05	1006		1.20	1081		1.34	1152		1.50	1220		1.65	1287		1.81		1353		1.98	1405		2.07	1472		2.17

CH120	4000	1012		1.40	1085		1.56	1153		1.73	1220		1.89	1283		2.06	1345		2.23		1405		2.41	1464		2.59	1522		2.78

	4400	1100		1.83	1166		2.00	1230		2.18	1292		2.37	1351		2.55	1410		2.74		1466		2.92	-		-	-		-

NOTE:

1. At higher evaporator airflows, and wet bulb conditions condensate carry-over may occur. Adjust airflow downward as necessary.

2. Values include pressure drop from wet coil and clean filters.

3. Shaded areas indicate oversize motors

036-21217-001-B-1203

Image 7

Contents Single Package AIR Conditioning Water Cooled Table of Contents General DescriptionCondenser-Type General Data CH060-120 5-10 TON Horizontal ModelsGeneral Data CU 5-20 TON Vertical Models General Data CU 300 25 TON Vertical Models Model Evaporator Blower Performance Data CU300 25 TON Model Evaporator FAN Performance CU 5-25 TON Vertical ModelsWaterside Pressure Drop CU Models Water Pressure Drop Data CH Models EDB Cooling Performance Data CH 5-10 TON Horizontal ModelsCooling Performance Data CU 5-20 TON Vertical Models EWB EDB Cooling Performance Data CU 300 25 TON Vertical ModelsStandard Motors CU 5-20 TON Models Standard Motors CH 5-10 TON ModelsStandard Evaporator Motors CU300 25 TON Dimensional Data CH 5 TON Horizontal Model Filter Frame Water Side View Electrical Connections Supply AIR Dimensional Data CU 15 TON Vertical Model Dimensional Data CU 20 TON Vertical Model Dimensional Data CU 25 TON Vertical Model Supply AIR/RETURN AIR Configuration HOT Water & Steam Heating Coils Dimensional Data HOT Water & Steam Heating Coils Performance Data Typical WATER-SIDE Economizer Physical Configuration WATER-SIDE Economizer Piping Schematic 036-21217-001-B-1203 036-21217-001-B-1203 036-21217-001-B-1203

CU060, CH060 specifications

The York CU060 and CH060 units represent a noteworthy combination of efficiency and advanced technological capabilities in the realm of commercial heating and cooling. These models are widely recognized for their robust performance and reliability, making them ideal for a variety of applications.

The CU060 is an air-cooled chiller that excels in providing reliable cooling for medium to large commercial buildings. It employs advanced scroll compressor technology that significantly enhances efficiency during operation. This results in lower energy consumption while maintaining optimal cooling performance. The high-efficiency rating also aligns with environmental regulations, supporting organizations in their sustainability goals.

One of the standout features of the CU060 is its microchannel condenser coils, which facilitate improved heat exchange capabilities. This design not only reduces refrigerant charge but also enhances the overall energy efficiency of the unit. These coils are resistant to corrosion and require less maintenance, contributing to a lower total cost of ownership over time.

On the other hand, the CH060 is designed specifically for heating applications, utilizing a hot water or steam configuration. This unit is ideal for commercial spaces requiring effective climate control during colder months. The CH060 leverages advanced controls and monitoring technologies, allowing users to maintain desired temperature levels with precision. Its ability to integrate seamlessly with building management systems further adds to its appeal, facilitating automated control and real-time monitoring.

Both units are equipped with sound-dampening features to minimize operational noise, making them suitable for installations in noise-sensitive environments such as schools and hospitals. The compact design of the CU060 and CH060 allows for flexible installation options, making them suitable for limited-space applications.

Overall, York's CU060 and CH060 models are notable for their efficiency, innovative engineering, and adaptability to various commercial settings. They stand as reliable choices for organizations seeking to enhance their heating and cooling solutions while minimizing their environmental footprint. With a commitment to performance and sustainability, these units represent a forward-thinking approach to climate control in the commercial sector.