HP LE1901w NK570A8#ABA, LE19F manual Sources. The monitor will automatically determine

Table 4-2OSD Menu (continued)

Icon	Main Menu	Submenu	Description
		Sleep Timer	Provides the timer adjustment menu options:
			● Set Current Time—sets the current time in hours
			and minutes
			● Set Sleep Time—sets the time you want to place
			the monitor in sleep mode
			● Set on Time—sets the time you want the monitor
			to wake up from sleep mode
			● Timer—sets the Sleep Timer feature On or Off.
			The default setting is Off.
			● Sleep Now—immediately sets the monitor to
			enter sleep mode
	Video Input		Selects the video input signal. DVI is the factory
	Control (select		default.
	models)
		Switch Video Input	Selects the other (VGA or DVI) video input signal.
			Default is DVI.
		Auto-Switch Input	Turns the system's automatic video signal input to on
			or off. The factory default is On.
		Default Video Input	Selects the default or primary video input signal when
			the monitor is connected to two active and valid video
			sources. The monitor will automatically determine the
			video format. The default input selection is DVI.
			Analog — VGA — Selects VGA input.
			Digital — DVI — Selects DVI input.
	Information		Selects and displays important information about the
			monitor.
		Current Settings	Provides the current input video mode.
		Recommended	Provides the recommended resolution mode and
		Settings	refresh rate for the monitor.
		Serial Number	Reports the serial number of the monitor. The serial
			number is needed if contacting HP technical support.
		Version	Reports the firmware version of the monitor.
		Backlight Hours	Reports the total hours of backlight operation.
		Service Support: http://
		www.hp.com/support
	Factory Reset		Returns all OSD menu settings and DDC/CI controls
			to the factory default settings, except the Language.
	Exit		Exits the OSD menu screen.

ENWW Adjusting the Monitor Settings 19