HP LA2205wg 22' NM274A8#ABA, 24IN MONITR A9P21A8#ABA Entering User Modes, Energy Saver Feature

Page 28

Table A-8Factory Preset Modes (continued)

4

1024

× 768

48.363

60.004

 

 

 

 

 

5

1280

× 960

60.00

60.00

 

 

 

 

 

6

1280

× 1024

63.981

60.02

 

 

 

 

 

7

1440

× 900

55.935

59.887

 

 

 

 

 

8

1600

× 1200

75.00

60.00

 

 

 

 

 

9

1680

× 1050

65.29

60.00

 

 

 

 

 

10

1920

× 1080

67.5

60.00

 

 

 

 

 

11

1920

× 1200

74.038

59.95

 

 

 

 

 

12

1920

× 1200

74.556

60.00

*Preset 2 not supported on LA2405x model.

Entering User Modes

The video controller signal may occasionally call for a mode that is not preset if:

You are not using a standard graphics adapter.

You are not using a preset mode.

It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display. Your changes can be made to any or all of these modes and saved in memory. The monitor automatically stores the new setting, then recognized the new mode just as it does a preset mode. In addition to the factory preset modes, there are 15 (LA1905wg model), 20 (LA2205wg and LA22f models), or 25 (LA2405wg and LA2405x models) user modes that can be entered and stored.

Energy Saver Feature

The monitors support a reduced power state. The reduced power state will be entered into if the monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and the power light is turned amber. When the monitor is in the reduced power state, the monitor will utilize less than 2 watts of power. There is a brief warm up period before the monitor will return to its normal operating mode.

Refer to the computer manual for instructions on setting energy saver features (sometimes called power management features).

NOTE: The above power saver feature only works when connected to computers that have energy saver features.

By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor to enter into the reduced power state at a predetermined time. When the monitor's Energy Saver utility causes the monitor to enter the reduced power state, the power light blinks amber.

22 Appendix A Technical Specifications

Image 28
Contents User Guide Fifth Edition April Document Part Number About This Guide Iv About This Guide Table of contents Page Product Features HP LCD MonitorsPage Setting Up the Monitor Unfolding the Monitor Pedestal BaseSetting Up the Monitor Rear ComponentsConnecting the Cables 3Connecting the CablesFront Panel Controls 1Monitor Front Panel ControlsAdjusting the Monitor 7Pivoting the Monitor Setting Up the Monitor Turning on the Monitor Connecting USB Devices Removing the Monitor Pedestal Base Mounting the Monitor Installing a Cable Lock Locating the Rating LabelsFinding More Information Reference GuidesProduct Support Finding More InformationTechnical Specifications Table A-1LA1905wl/LA1905wg SpecificationsLA1905wl/LA1905wg Models LA1905wl/LA1905wg ModelsTable A-2LA2205wg Specifications Appendix a Technical SpecificationsLA2205wg Model LA2205wl/LA22f Models Table A-3LA2205wl/LA22f SpecificationsLA2205wl/LA22f Models Table A-4LA2405wg Specifications LA2405wg ModelLA2405x Model Table A-5LA2405x SpecificationsLA2405x Model Appendix a Technical Specifications Recognizing Preset Display Resolutions Recognizing Preset Display ResolutionsTable A-6Factory Preset Modes Table A-7Factory Preset ModesEnergy Saver Feature Entering User Modes