Turning on the Monitor
1.Ensure that the master power switch on the rear of the monitor is in the On position.
2.Press the power button on the computer to turn it on.
3.Press the power button on the front of the monitor to turn it on.
CAUTION:
* A prolonged period of time is 12 consecutive hours of
The monitor automatically scans the signal inputs for an active input and uses that input for the display. If two inputs are active, the monitor will display the default input source. If the default source is not one of the active inputs, then the monitor will display the highest ranking priority input in the following order: DisplayPort, then DVI. You can change the default source by pressing the Source button on the front panel.
10 Chapter 3 Setting Up the Monitor | ENWW |