HP TFT7210R manual Removing the rails, Removing the HP 1U Adjustable Toolless Rails

Removing the rails

Removing the HP 1U Adjustable Toolless Rails

1.Remove the HP TFT7210R.

2.Remove the brace rail assembly.

3.Locate the spring release.

4.Place your hand on the outside of the HP 1U Adjustable Toolless Rail so that you can move the spring release.

5.Gently move the spring release toward the inside of the rack (1) while moving the HP 1U Adjustable Toolless Rail out toward you and away from the rack (2).

NOTE: If you cannot gain access to the spring release from the outside of the HP 1U Adjustable Toolless Rail, a tool might be required to unlock the spring release from the unit side of the HP 1U Adjustable Toolless Rail.

6.Repeat the previous steps for the other HP 1U Adjustable Toolless Rail.

Removing the rails 24