HP D8907, P720 manual Important Safety Instructions

Page 4

WARNING

Working in Comfort

CAUTION

!

HP 17” Color Monitor User’s Guide

Important Safety Instructions

Important Safety Instructions

For your safety always connect equipment to a grounded wall outlet. Always use a power cord with a properly grounded plug, such as the one provided with the equipment, or one in compliance with your national safety standards. This equipment can be disconnected from the power by removing the power cord from the power outlet. This means the equipment must be located close to an easily accessible power outlet.

To avoid electrical shock, do not open the monitor's cover. There are no user-serviceable parts inside. Only qualified service personnel should service these parts.

Make sure your PC is powered off before connecting or disconnecting a display peripheral.

Thank you for selecting HP monitor equipment.

To optimize your comfort and productivity, it's important that you set up your work area correctly and use your HP equipment properly. With that in mind, we have developed some setup and use recommendations for you to follow based on established ergonomic principles.

You can consult the online version of Working in Comfort preloaded on the hard disk of HP computers, or visit HP's Working in Comfort web site at:

http://www.hp.com/ergo/

The monitor is quite heavy (the weight is shown in the technical specifications). We recommend you ask the assistance of a second person when lifting or moving it.

The lightning flash with arrowhead symbol, situated within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" which may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.

2English

Image 4
Contents Hp p720 Hinweis Inch Color Monitor Important Safety Instructions What Your New Monitor Offers Setting Up Your Monitor Where to Place the MonitorConnecting the Cables Computer, if necessaryHow To Install The Drivers Click on the Start Ö Settings Ö Control PanelWindows 95, Windows 98 or Windows 2000 Operating Systems Click on Have DiskUsing Your Monitor Press the Menu button to activate the on-screen display OSDAdjusting Your Monitor Menu FeaturesImage adjustment User ControlsSize PositionPress the Menu button Trapezoid Rotation ParallelogramPinbalance Linearity Moire Horizontal Moire H-Moire MoireVideo Input Level Color TemperatureV. The Video Input Level Halftone To select or deselect the HalftoneFunction Halftone iconLinearity , H-Moire and V-Moire Reset. All other settings will remain the same SettingsYou to display your monitor’s Highlight Display TimingResolution Refresh Rate/Hz Minimizing Eye StrainMinimizing Energy Consumption Supported Video ModesTroubleshooting Self-Test Feature Check StfcMoiré Refer to this section, before contacting technical supportWarm-up Time No picture and LED is off No picture and LED is onColors are not pure Picture is not centeredTechnical Specifications Care and Cleaning Environmental InformationHP General Hardware Warranty Hardware WarrantyModel Warranty Period Proof of Purchase and Warranty Period Regulatory Information Declaration of ConformityRay Radiation Notice Safety Warning for USA Hinweis für Deutschland Geräuschemission TCO CFCs freons