Safety Information, System Operation

66386-YUM-C-1011

SAFETY INFORMATION

FOR YOUR SAFETY

•Make sure that the furnace area is clear and free of combustible materials, gasoline and other flamma- ble vapors and liquids.

•Be sure the furnace is clear and free of insulating material. Examine the furnace area after installa- tion of the furnace or the installation of additional insulation. Some types of insulation are combusti- ble.

•For proper operation of this furnace, air for com- bustion and ventilation is required. Make sure that these openings are not obstructed.

•For lighting or shutting down this furnace, refer to the lighting instructions provided adjacent to the burners and also located in this manual.

•A blocked vent roll-out switch is provided in the burner compartment. This switch is a manual reset. If the furnace fails to operate, contact a qualified service technician.

•Should the gas supply fail to shut off or if overheat- ing occurs, shut off the gas valve to the furnace before shutting off the electrical supply. Then call a qualified service technician.

•Do not use this furnace if any part has been under water. A flood-damaged furnace is extremely dan- gerous. Attempts to use the furnace can result in fire or explosion. A qualified service technician should be contacted to inspect the furnace and to replace all gas controls, control system parts, elec- trical parts that have been wet or the furnace if deemed necessary.

•Determine the integrity of the installation regarding the flue gas vent, the return and supply air duct. Confirm the equipment is well supported and there are no signs of deterioration. The manufacturer recommends that main burner, ignition device and controls are inspected by a qualified service techni- cian before each heating season.

SYSTEM OPERATION

THERMOSTATS

Set your thermostat for either heating or cooling then set it for the desired temperature. DO NOT ADJUST THE THERMO-

STAT RAPIDLY ON AND OFF, OR BACK AND FORTH FROM HEAT TO COOL. THIS COULD DAMAGE YOUR EQUIPMENT.

Always allow at least 5 minutes between changes. Find the temperature that is most comfortable to you and then LEAVE YOUR THERMOSTAT ALONE. (Exception is for night or vacation “set back” to conserve energy).

Manually moving the thermostat up or down will not speed up temperature changes in your rooms. This only causes the thermostat switch to function at your command rather than responding to room temperature.

Heat generated by devices other than the furnace may inter- fere with thermostat performance. Therefore, lamps, radios, television sets, etc. should not be placed near the thermostat.

FIGURE 1- TYPICAL THERMOSTAT

INTERMITTENT IGNITION DEVICE

This furnace is equipped with an intermittent auto- matic ignition system. Do Not attempt to manually relight the burners. Personal injury could result.

When the thermostat calls for heat, gas is supplied and at the same time, sparking occurs to light the burner. With the burner lit, the flame sensor rod closes a circuit to the ignitor control which allows the burner to continue to fire.

When the room thermostat is satisfied, the electrical circuit to the gas valve is opened, closing main burner gas. If the burner should fail to light, contact your heating contractor or gas utility for service to insure that proper operating condi- tions are restored.

2	Johnson Controls Unitary Products

66386-YUM-C-1011 specifications

York 66386-YUM-C-1011 is an advanced residential air conditioning unit designed to deliver efficient cooling and heating solutions for homes. This model is distinguished by its energy-efficient operation and innovative features that ensure optimal indoor comfort throughout the year. With a capacity typically suited for medium-sized homes, it provides reliable performance while keeping energy consumption in check.

One of the standout features of the York 66386-YUM-C-1011 is its ENERGY STAR certification, which signifies its high efficiency in energy use compared to standard models. This certification ensures that users can enjoy lower utility bills while contributing to environmental sustainability. The unit is equipped with a variable-speed compressor, which adjusts its cooling output based on the temperature needs of the home, resulting in quieter operation and enhanced humidity control.

The unit also incorporates advanced technology such as a programmable thermostat, allowing homeowners to schedule their heating and cooling settings for optimal comfort and efficiency. The intuitive interface of the thermostat makes programming easy, and its smart features can even learn your preferences over time, adjusting accordingly to ensure the home remains comfortable.

In terms of construction, the York 66386-YUM-C-1011 is designed with durability in mind. It includes a robust cabinet that protects internal components from the elements, ensuring longevity and reliable performance. Additionally, the unit features sound-dampening technology, minimizing noise during operation, which is particularly beneficial for residential settings where quietude is essential.

The air conditioner utilizes environmentally friendly refrigerant, which not only meets regulatory standards but also promotes a greener solution without sacrificing performance. With a focus on user comfort, ease of maintenance is another highlight of the York 66386-YUM-C-1011. The unit has easily accessible filters and components, simplifying routine check-ups and servicing.

Overall, York 66386-YUM-C-1011 stands out as a top-tier option for homeowners seeking an effective and efficient air conditioning solution. Its combination of energy savings, advanced features, and durable design makes it an ideal choice for maintaining a comfortable and environmentally friendly living space. This model exemplifies York's commitment to quality and innovation in home comfort systems, ensuring that homeowners can rely on it for years to come.