HP L1908WM, L2245W, L2208W, L1950, L1945WV 19Installing the HP Quick Release Setting Up the Monitor

3.Place the optional HP Quick Release onto the back of the monitor. Line up the holes on the HP Quick Release with the mounting holes on the back of the monitor.

Figure 3-18Mounting the HP Quick Release

4.Insert four 10mm screws into the mounting holes and tighten.

5.Mount the HP Quick Release to a swing arm or other mounting fixture using the four screws removed from the back of the monitor in the previous step.

Figure 3-19Installing the HP Quick Release

CAUTION: The HP Quick Release is designed to support a maximum of up to 24 lbs. (10.9 kg). If you are mounting to a wall, HP recommends that you consult with a qualified engineering, architectural, or construction professional to determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that the mounting solution is properly installed to support applied loads.

18 Chapter 3 Setting Up the Monitor