Cleaning the Monitor

2025 Flat Panel Display

■Do not overload an electrical outlet, power strip, or convenience receptacle. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip input rating.

■Install the monitor near an outlet that you can easily reach. Disconnect the product by grasping the plug firmly and pulling it from the outlet. Never disconnect it by pulling the cord.

■Unplug the monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

■Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings.

■Do not drop the monitor or place it on an unstable surface.

■Do not allow anything to rest on the power cord. Do not walk on the cord.

■Keep the monitor in a well-ventilated area, away from excessive light, heat, and moisture. Keep the monitor away from high capacity transformers, electric motors, and other strong magnetic fields.

■Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered by the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact your authorized dealer, reseller, or service provider.

To clean the monitor, follow these steps:

1. Turn off the monitor and the computer.

User’s Guide