HP S2022a, S1922a manual Technical Specifications, HP LCD Monitors

B. Technical Specifications

All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower.

HP LCD Monitors

Face treatment: Glare polarizer with hard coating

Input terminal:

VGA connector

DVI-D 24-pin D-type connector (select models)

Table B-1 Model S1922

Specifications:
Display Type:	TFT LCD active matrix
Viewable Image Size	47 cm (18.5 in.) diagonal
Tilt	-4°(+/-2)~+18°(+/-2)
Maximum Weight (unpacked)	3.2 kg(7.04 lbs)
Dimensions (h x w x d)	340.95 mm x 440.3 mm x 180 mm
	13.5 x 17.4 x 7 in
Maximum Graphics Resolution	1366 x 768 @ 60 Hz
Optimum Graphics Resolution	1366 x 768 @ 60 Hz analog mode
Text Mode	720x400
Dot Pitch	0.3 x 0.3 mm/0.01 x 0.01 in
Horizontal Frequency (analog mode)	30 to 83 kHz
Vertical Frequency (analog mode)	55 to 75 Hz
Environmental Requirements
Temperature (independent of altitude)
Operating Temperature	41°	to 95°	F (5° to 35° C)
Non-Operating Temperature	-4°	to 140°	F (-20°to 60° C)
Relative Humidity (non-condensing)
Operating Humidity	15% to 90%
Non-Operating Humidity	5% to 90%
Power Source	100-240V~, 50/60 Hz
Power Consumption	37 watts (W)
Sleep Power Consumption	<1.0 watts (W)

ENWW 21