HP FP 1906, 1706 manual Troubleshooting

Troubleshooting

Problem	Possible Cause	Solution
Image appears	Brightness and contrast	Press the Auto Adjust button
blurred, indistinct, or	are too low.	on the front panel. If this
too dark.		does not correct the image,
		press the Menu button to
		open the Basic OSD Menu,
		and adjust the brightness
		and contrast scales as
		needed.
Image is not	Position may need	Press the Menu button to
centered.	adjustment.	access the OSD menu.
		Select Image Control/
		Horizontal Position or
		Vertical Position to adjust the
		horizontal or vertical
		position of the image.
“No Connection,	Monitor video cable is	Connect the 15-pin monitor
Check Signal Cable”	disconnected.	video cable to the VGA
is displayed on		connector on the computer,
screen.		the DVI-D signal cable to the
		DVI connector on the
		computer, or the VGA to
		DVI-I cable to the VGA
		connector on the computer.
		Be sure that the computer
		power is off while
		connecting the video cable.

A–2 User Guide