HP t5135 manual Installing the USB device, Replacing the secure USB compartment cover

Installing the USB device

▲Insert the USB device into the USB port in the secure USB compartment. See the following illustration for the location of the ports in the secure USB compartment.

Figure 2-2Secure USB compartment port location

Replacing the secure USB compartment cover

To replace the secure compartment cover:

1.Place the cover on top of the unit so it is offset about 1/2–inch toward the rear of the unit, allowing the tabs on the cover to align and insert into the slots on the chassis (1).

2.Slide the cover toward the front of the unit until it locks in place and the cover is flush with the front panel of the chassis (2).

3.Replace the screw (3).

Figure 2-3Replacing the secure compartment cover

To remove USB devices from the secure compartment, reverse the previous procedures.

ENWW Installing USB devices in the secure USB compartment 11