HP ML110 manual Storage Optical Drive, Hard Drives, Maximum Internal Type Storage

QuickSpecs

HP ProLiant ML110 Generation 5

Standard Features

Expansion Slots #	Technology	Bus	Connector	Bus	Device	Form Factor	Notes
		Width***	Width	Number*	Number**
1	PCI (33MHZ	32-bit	N/A	0	30	Full height
	/3.3Volt)					slot
2	PCIe	X1	X8	0	28	Full height
						slot
3	PCIe	X1	X8	2	28	Full length,
						full height
						slot
4	PCIe	X8	X8	0	1	Full length,
						full height
						slot

*Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number.

**Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus).

***Indicates the number of physical electrical lanes running to a PCI-e connector.

NOTE: PCI-X Interface (PCI 32bit/33MHz compatible)

Storage Controller	SATA Models	Integrated 6 ports SATA controller with embedded RAID (4 ports
One of the following		available for Hard Disks)
depending on Model	SAS Models	HP SC40Ge Host Bus Adapter with RAID 0, 1 support
Storage	Optical Drive	SATA DVD-ROM Drive
	Hard Drives	SATA	160GB SATA 7200 rpm Drive
		SAS	72GB SAS 15,000 rpm Drive
Maximum Internal	Type
Storage	SAS	1.2TB	(4 x 300 GB)
	(Not-hot plug)
	SATA	2TB	(4 x 500 GB*)
	(Non-hot plug)

*Offered through Configure-To-Order only. See Factory Integrated Models section for more details

DA - 12867 Worldwide QuickSpecs — Version 10 — 4.18.2008 Page 4