HP blade bc1000 manual GB Ultra ATA/100 Capacity 40 GB Hard Drive Interface, 100 MB/s Maximum

4.7 in (11.94 cm)

0.8 in (2.03 cm)

15.5 in (39.37 cm)

2.2 lb (1.0 kg)

50° to 95° F (10° to 35° C)

-40° to 140° F (-40° to 60° C) -4° to 140° F (-20° to 60° C)

10% to 90%

10% to 90%

10% to 95% Off = off

Steady blue = blade identified

Blinking blue = being accessed remotely Off = off

Green = health good

Amber = degraded or power up prohibited by the Integrated Administrator

Blinking or steady red = critical Off = off

Green = linked to network

Blinking green = Activity on network Off = off

Green = linked to network

Blinking green = activity on network Off = No drive activity

Blinking green = drive activity

Off = no AC power to blade or enclosure Amber = Enclosure on and in good health Green = blade power on

NOTE 1: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Storage maximum humidity of 95% is based on a maximum temperature of 112° F (45° C). Minimum pressure for storage is 70 KPa.

Power

Drive activity

NIC 2

NIC 1

Health

LEDs (Top to bottom)

Relative humidity1 (noncondensing)

Weight Temperature1

Height

Width

Depth Maximum Operating

Non-operating shipping Non-operating storage Operating Non-operating shipping Non-operating storage Unit identification

HP bc1000 blade PC

Dimensions

QuickSpecs

Technical Specifications

HP bc1000 blade PC

40-GB Ultra ATA/100	Capacity	40 GB
Hard Drive	Interface	Ultra ATA 100
	Transfer rate synchronous	100 MB/s
	(maximum)
	Seek time (typical reads,	Single track	1.5 ms
	including settling)	Average	12 ms
		Maximum	22 ms
	Rotational speed	5400 rpm

DA - 11903 North America — Version 5 — May 20, 2005 Page 14