QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
NOTE: Requires optical transceivers and switch cabling which must be supplied separately.
The HP 3PAR StoreServ 7400 16Gb Virtualization Base System SAN Kit includes the HP 3PAR StoreServ 7400 2-node Storage Base and (2) QK753B HP SN6000B 16 Gb/s 48-port/24-port Active FC Switches -dual power. Each switch comes with rack mount kit (including rails, mounting hardware, and plenum), RJ-45 serial cable with adaptor for RJ-45 to DB9, power cords, and SAN Network Advisor DVD. Also included is a 3 year warranty for the switches.
NOTE: Requires optical transceivers and switch cabling which must be supplied separately.
All base configurations include built-in Gigabit Ethernet ports for management and Remote Copy over IP.
*Storage Centric Configuration
The Storage Centric rack versions of HP 3PAR StoreServ 7200 and 7400 are for CTO (factory Configure-To-Order) only. With a Storage Centric configuration, the storage system gets placed in the center of the rack so that future expansion of that storage system becomes easier.
In Storage Centric configurations, non-3PAR components, with the exception of certain StoreFabric Storage Networking switches, if added to the same order, get placed in a separate rack.
The following diagrams show a HP 3PAR StoreServ 7400 4-node Storage System in Storage Centric and non-Storage Centric configurations
DA - 14433 North America — Version 17 — December 10, 2013 | Page 10 |
