HP Music MC-1 manual Connect to A/V Receiver and TV, Internet Connection, Power On, Welcome

Page 1

Connect to A/V Receiver and TV

1(Color Coded Cables)

1 Connect the Stereo Cable to the Compaq iPAQ™ Music Center audio output and to an available audio input on your A/V receiver* such as CD, tape or auxiliary.

2 Connect the Composite Video Cable to the iPAQ Music Center video output and to an available video input on your television.*

3 Connect the Power Cable to the iPAQ Music Center and to a power outlet.

TV

2Composite Video Cable

iPAQ Music Center

3Power Cable

A/V Receiver

1Stereo Cable

Internet Connection

2

Using the Built-In Modem

1 Connect the Telephone Cable to the modem jack.

2 Connect the other end to a telephone wall jack.*

Note: If a telephone wall jack is not conveniently located near your Music Center, you may consider using a wireless telephone jack system.

or

HPNA Setup

1 Connect the Telephone Cable (with a minimum length of 6 feet) to the HPNA network jack on the iPAQ Music Center. 2 Connect the other end to a telephone wall jack.*

Built-In Modem Setup

HPNA Setup

or

1Telephone Cable

1Telephone Cable

2 Telephone Wall Jack

2 Telephone Wall Jack

Power On

3

1 When the LED turns solid red, press the

LED

power button on the front of your

 

 

 

 

iPAQ Music Center.

 

 

2 Turn on your A/V receiver and select the

 

 

proper input mode, such as CD, tape or

 

 

auxiliary.

 

 

3 Select the video input on your television

 

 

that matches the input you used when

 

 

connecting the iPAQ Music Center.

1

 

 

 

 

Welcome!

4

Once you’ve selected the correct input on your television, the Welcome screen will be displayed. In just a few moments, you will be able to start enjoying your iPAQ Music Center.

*For best audio performance, use S/PDIF digital audio connections (either optical or coaxial) instead of analog stereo. For best video performance, use S-Video connections instead of composite video where possible. Digital and S-Video Cables are not included. For more information about other possible connections, see Chapter 2 in your Getting Started guide.

*Use the included telephone splitter if you also want to use a telephone at this location.

Image 1
Contents Connect to A/V Receiver and TV Power OnInternet Connection WelcomeTo program your remote control for the TV and A/V receiver Remote Control FunctionsIPAQ Music Center
Related manuals
Manual 68 pages 10.41 Kb Manual 38 pages 33.76 Kb