QuickSpecs
HP LP1965 19-inch LCD Monitor
Technical Specifications - HP LCD Monitor Quick Release
Mechanical | Dimensions | Packaged | 7.8 x 6.25 x 1.5 in (19.8 x 15.9 x 3.8 cm) |
| (H x W x D) | Unpackaged | 6.3 x 5.2 x 0.65 in (16 x 13.2 x 1.65 cm) |
| Weight | Packaged | 1.1 lb (0.49 kg) |
|
| Unpackaged | 0.82 lb (0.37 kg) |
Additional components | Eight 10 mm mounting screws (for attachment to VESA compliant monitor mounts) |
| Eight 15.5 mm mounting screws (for attachment to HP Thin Client products) |
| Four 20 mm mounting screws (for attachment to back of select HP flat panel monitor stands) |
| One Quick Release "locking" screw |
Color | Carbonite |
Notes | 1. No HP monitors allow positioning of a thin client product between a monitor screen and its stand. |
2.The Quick Release device is not to be used between a monitor screen and its stand unless provided that way from the factory.
3.Under no circumstances is the Quick Release device intended to be used in an orientation where the Release/Lock lever is oriented downward.
Supported weight | The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) depending |
capacity | upon the mounting configuration used. Please note this is a total weight limit for all devices mounted, i.e. |
| the combined weight of the monitor and a second device such as an HP Thin Client cannot exceed 24 |
| pounds. Because mounting surfaces vary widely and the final mounting method and configuration may |
| vary, mounting fasteners are not supplied (other than the |
| you consult with a qualified engineering, architectural or construction professional to determine the |
| appropriate type and quantity of mounting fasteners required for your application and to ensure that your |
| mounting solution is properly installed to support applied loads. |
|
|
© Copyright 2008
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. ENERGY STAR is a registered mark owned by the U.S. government.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 12620 Worldwide — Version 10 — December 15, 2008 | Page 11 |