HP F520g manual Getting Started, Inserting the Memory Card

2 Getting Started

2.1 Inserting the Memory Card

Insert the memory card with the gold contacts facing the back of the camcorder. Push the memory card until it clicks into place.

To remove the memory card

Push to eject the memory card out of the slot.

Note:

1.Do not remove or insert the memory card when the camcorder is turned on. This may damage the memory card.

2.Please use a 32GB, Class 10 or above Micro SD card.

3.Please format the micro SD cards before the initial use.

4.If the screen shows “Low Speed Card” while recording, it means the writing speed of the memory card is too slow. Please replace it with a higher-speed memory card.

5.If “Card is too fragmented” is displayed while recording, it means the card is unable to save the recording. Please make a copy of existing files in the card and then reformat it with this camcorder.

9