HP c8000 manual

10.Install and secure the cable management arm to the mid-weight outer slide assemblies.

11.Extending the cable management arm, slide the server forward.

12.Route the cables through the cable management arm.

13.Install hook-and-loop straps, as needed, to secure the cables.

NOTE: The yellow plastic shipping tie is not included in the kit (0684-0860 or equivalent).

14.Install a yellow plastic shipping tie.

NOTE: All M5 screws must be torqued to 6.2 Nm (55 lb).

15.Use the M5 x 16-mm screws to install and secure the tie-down bracket to the mid-weight right outer slide assembly. If you have a square-hole rack, insert the M5 x 10-mm screw in hole

(1). If you have a round-hole rack, insert the M5 x 10-mm screw in hole (2).