HP c8000 manual About this device, Kit contents

HP Mid-Weight Slide Kit (5069-6371)

Installation Instructions

© Copyright 2006, 2008 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Part Number 416755-003

March 2008 (Third Edition)

About this device

The HP Mid-Weight Slide Kit (5069-6371) enables you to install HP 2U, 3U, 4U, and 5U servers into HP round-hole, square-hole, threaded-hole, and early HP racks.

Kit contents

If any of the following items are missing or damaged, contact your HP authorized reseller. The following hardware pieces are included in this kit.

	Quantity	Description		Picture
	1	Cable management arm (J1539-63003)
	2	Mid-weight inner slides (J1539-63001)
	2	Mid-weight outer slide assemblies (J1539-
		63002)
	2	Hook-and-loop straps (1400-2030)
	1	Mid-weight slide-mounting alignment tool
		(5185-6098)
Hardware kit contents
	Quantity		Description	Picture
	2		M5 x 30-mm screw (0515-2992)
	1		M5 x 10-mm screw (5021-2991)
	2		M5 x 16-mm screw (0515-3019)
	4		M4 x 8-mm screw (0515-2478)
	2		M5 barrel nut (5065-7210)
	1		Tie-down bracket (5069-6357)

Optional hardware kit contents (J1539-63004)

The optional hardware kit is required to install the mid-weight slide kit into early HP racks.

Quantity	Description	Picture
4	M5 x 16-mm screw (0515-3019)
2	M6 flathead screw (5185-6036)
2	Front bracket (5184-2312)