NOTE: Some of the listed System Configuration options may not be supported by your computer.
Select | To do this | |
|
| |
Language (or press f2) | Change the Computer Setup language. | |
|
| |
Boot options | ● Set f9, f10, and f12 delay when starting up. | |
| ● Enable/disable | |
| ● Enable/disable floppy boot. | |
| ● Enable/disable internal network adapter boot and set the | |
| boot mode (PXE or RPL). | |
| ● Enable/disable MultiBoot, which sets a boot order that | |
| can include most boot devices in the system. | |
| ● Set the Express Boot Popup delay in seconds. | |
| ● Set the boot order. | |
|
| |
Device configurations | ● Swap the functions of the fn key and left ctrl key. | |
| ● Enable/disable multiple standard pointing devices at | |
| startup. (To set the computer to support only a single, | |
| usually nonstandard, pointing device at startup, select | |
| Disable.) | |
| ● Enable/disable USB legacy support. When enabled, USB | |
| legacy support allows the following: | |
| ◦ | Use of a USB keyboard, mouse, and hub in |
|
| Computer Setup even when a Windows operating |
|
| system is not running. |
| ◦ | Startup from bootable USB devices, including a hard |
|
| drive, diskette drive, or optical drive connected by a |
|
|
|
Computer Setup menus 85