f.Display lid switch module (see Display lid switch module on page 54)

g.Display assembly (see Display assembly on page 55)

h.Top cover (see Top cover on page 60)

Remove the Bluetooth module:

1.Disconnect the Bluetooth module cable (1) from the system board.

2.Remove the two Phillips PM2.0×4.0 screws (2) that secure the Bluetooth module to the base enclosure.

3.Remove the Bluetooth module (3) from the base enclosure.

Reverse this procedure to install the Bluetooth module.

System board

NOTE: All system board spare part kits include the ExpressCard assembly.

NOTE: All system board spare part kits include replacement thermal material. Replacement thermal material is also available in the heat sink spare part kit, spare part number 456605-001.

Description

Spare part number

 

 

For use only with computer models equipped with Intel GME965 graphics chipset, Intel UMA

495410-001

graphics subsystem, and PATA optical drive

 

 

 

For use only with computer models equipped with Intel GLE960 graphics chipset, Intel UMA graphics

495395-001

subsystem, and PATA optical drive

 

 

 

For use only with computer models equipped with Intel GME965 graphics chipset, Intel UMA

495404-001

graphics subsystem, and SATA optical drive

 

 

 

For use only with computer models equipped with Intel GLE960 graphics chipset, Intel UMA graphics

495397-001

subsystem, and SATA optical drive

 

 

 

66 Chapter 4 Removal and replacement procedures