Speaker
Description | Spare part number |
|
|
Speaker |
|
|
|
Before removing the speaker, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 39).
5.Remove the keyboard (see Keyboard on page 50).
6.Remove the switch cover (see Switch cover on page 48).
Remove the speaker:
1.Disconnect the speaker cable (1) from the system board.
2.Remove the two Torx T8M2.5×4.0 screws (2) that secure the speaker to the top cover.
3.Remove the speaker (3) from the top cover.
Reverse this procedure to install the speaker.
Component replacement procedures 53
