HP 72H3482 manual HP Vectra VL8 with Windows NT Workstation 3.51 installed

Page 33

4Connecting to a Windows NT Server 4.0 Windows NT Workstation Version3.51

Windows NT

Workstation

Version3.51

Requirements

HP Vectra VL8 with Windows NT Workstation 3.51 installed.

IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.SYS Size: 51KB Date: 9/28/96

DOS and MS-Windows NT workstation 3.51 media.

Microsoft NT 4.0 server that supports Net BEUI, TCP/IP, NWLink IPX/ SPX, and NWLink NetBIOS transfer protocols.

Device Configuration

Interrupt

3

I/O Address

EFC-EFF

R0M Address

C8000-C9FFF

Token Ring Rate

16

Procedure

1With the HP Vectra VL8 turned off install the IBM Turbo 16/4 TR adapter card into an ISA slot.

2Insert the IBM TR drivers disk 1 of 4 and power on the machine.

3After the machine boots, select option 2 “IBM Turbo 16/4 Token-Ring ISA Configuration Using LANAIDC” and hit enter.

4When prompted, press any key to continue with the LANAID setup program.

5Type “/VIEW” to check the adapter settings and verify the data listed under device configuration.

6Remove the IBM TR drivers disk 1 of 4, power on the machine, and boot to Windows NT 3.51.

7After windows loads, log onto the machine with administrator privileges. (If you do not have the required information, contact your network administrator)

8Open the “Main” program group, double-click on the “Control Panel” icon.

9Select the “Network” icon in the “Control Panel” program group.

Image 33
Contents Turbo16/4 Token Ring Network ISA Adapter 72H3482 Page Connecting to a Netware 3.12 Server Connecting to a Netware 3.12 Server Windows for Workgroups Windows 95 SR2 Requirements Connecting to a Netware 3.12 Server Windows 95 SR2 Connecting to a Netware 3.12 Server Windows 95 SR2 Connecting to a Netware 3.12 Server Windows 95 SR2 Connecting to a Netware 4.11 Server Connecting to a Netware 4.11 Server Windows for Workgroups Connecting to a Netware 4.11 Server Windows 95 SR2 Connecting to a Netware 4.11 Server Windows 95 SR2 Connecting to a Netware 4.11 Server Windows 95 SR2 Connecting to a Netware 4.11 Server Windows 95 SR2 Connecting to a Windows NT 3.51 Server Page Page SPX, and NWLink NetBIOS transfer protocols Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows NT Workstation Version3.51 Requirements Page Page Page Windows NT Workstation Version Requirements Page Connecting to a Windows NT 4.0 Server Connecting to a Windows NT 4.0 Server Windows for Workgroups Connecting to a Windows NT 4.0 Server Windows for Workgroups Connecting to a Windows NT 4.0 Server Windows for Workgroups Windows 95 SR2 Requirements Connecting to a Windows NT Server 4.0 Windows 95 SR2 Connecting to a Windows NT Server Windows 95 SR2 HP Vectra VL8 with Windows NT Workstation 3.51 installed Page Page Windows NT Workstation Version Requirements Page Page Page Page Version Number IBM Turbo 16/4 Rev.1