HP 550 manual Using the MEBx setup utility menus

Using the MEBx setup utility menus

NOTE: For more information on iAMT, see the Intel Web site at http://www.intel.com/vpro.

Intel ME Configuration

Select	To do this
Intel ME State Control	Disable/enable the management engine.
Intel ME Firmware Local Update	Disable/enable local management of firmware updates.
LAN Controller	Disable/enable the integrated network controller.
Intel ME Features Control	Enable AMT or none.
Intel ME Power Control	Configure the management engine power policies.

Intel AMT Configuration

Select	To do this
Host Name	Assign a host name to the computer.
TCP/IP	Disable/enable network interface or DHCP (assigns an IP
	address if DHCP has been disabled) or change the domain
	name.
Provisioning Server	Assign a Provisioning server address.
Provision Model	Assign Enterprise or Small Business Intel AMT model.
Set PID and PPS	Enter PID and PPS.
Un-Provision	Reset the AMT configuration to factory defaults.
SOL/IDE-R	Enable remote boot control to IDE floppy or CD-ROM and
	assign a username and password.
Secure Firmware Update	Enable or disable updating firmware remotely.
Set PRTC	Set the real-time clock.
Idle Timeout	Set a time-out value.

Change Intel ME Password

Select	To do this
Change ME Password	Change the password.
	NOTE: The default password is admin.

8 Chapter 2 Using Intel Active Management Technology (select models only)