Using the MEBx setup utility menus, Intel ME Configuration

Using the MEBx setup utility menus

NOTE: For more information on iAMT, see the Intel Web site at http://www.intel.com/vpro.

Select	To do this

Intel ME State Control	Disable/enable the management engine.

Intel ME Firmware Local Update	Disable/enable local management of firmware updates.

LAN Controller	Disable/enable the integrated network controller.

Intel ME Features Control	Enable AMT or none.

Intel ME Power Control	Configure the management engine power policies.

Select	To do this

Host Name	Assign a host name to the computer.

TCP/IP	Disable/enable network interface or DHCP (assigns an IP
	address if DHCP has been disabled) or change the domain
	name.

Provisioning Server	Assign a Provisioning server address.

Provision Model	Assign Enterprise or Small Business Intel AMT model.

Set PID and PPS	Enter PID and PPS.

Un-Provision	Reset the AMT configuration to factory defaults.

SOL/IDE-R	Enable remote boot control to IDE floppy or CD-ROM and
	assign a username and password.

Secure Firmware Update	Enable or disable updating firmware remotely.

Set PRTC	Set the real-time clock.

Idle Timeout	Set a time-out value.

Select	To do this

Change ME Password	Change the password.
	NOTE: The default password is admin.

8	Chapter 2 Using Intel Active Management Technology (select models only)