HP 4410t Mobile manual Inserting an optical disc CD or DVD

Page 82

Optical drive type

Read from CD and

Write to CD-RW discs

Write to DVD±RW

Write to DVD+R DL

 

DVD-ROM discs

 

discs

discs

 

 

 

 

 

DVD-ROM

Yes

No

No

No

 

 

 

 

 

CAUTION: To prevent possible audio and video degradation, or loss of audio or video playback functionality, do not initiate Standby while reading from a CD or DVD.

If Standby is initiated during playback of a disc, you may experience the following behaviors:

●Your playback may be interrupted.

●You may see a warning message asking if you want to continue. If this message is displayed, click No.

●You may need to restart the CD or DVD to resume audio and video playback.

Inserting an optical disc (CD or DVD)

1.Turn on the computer.

2.Press the release button (1) on the drive bezel to release the disc tray.

3.Pull out the tray (2).

4.Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up over the tray spindle.

NOTE: If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.

5.Gently press the disc (3) down onto the tray spindle until the disc snaps into place.

6.Close the disc tray.

NOTE: After you insert a disc, a short pause is normal before playback begins.

72 Chapter 14 Hardware upgrades

Page 81 Page 83
Image 82
Page 81 Page 83
Contents HP 4410t Mobile Thin Client Product notice Safety warning notice Iv Safety warning notice Table of contents Applications Power Modem and LAN Using Media Card Reader cards Appendix a Routine care Identifying the hardware DisplayTop components Pointing devicesLights Buttons, switches, and speakers Keys Fn keyFront components Right-side components Left-side componentsBottom components Wireless antennas Identifying the labelsPage File-Based Write Filter Using the File-Based Write Filter command line controlHP Write Filters Select Start RunUsing the File-Based Write Filter configuration interface Using the File-Based Write Filter status utility Set Cache ThresholdUsing the Enhanced Write Filter command line control Enhanced Write FilterUsing the Enhanced Write Filter configuration interface Using the Enhanced Write Filter status utility Drive Z ConfigurationLocal drives Drive CRoaming profiles Saving filesMapping network drives Click Reconnect at logonCreating a new user account User accountsCreating user profiles Page Applications Remote Desktop ConnectionHP Remote Graphics Software RGS HP Virtual Client EssentialsTeemTalk Terminal Emulation HP Session Allocation Manager SAMAltiris Client Agent HP Device Manager HP Client Automation HP Dhcp Settings Update Client HP ThinState Deploy HP ThinState CaptureSelect Start Control Panel HP ThinState Capture Microsoft Internet Explorer Windows Media PlayerUsing the keyboard Using pointing devicesPointing devices and keyboard Function Hotkey Opening Help and Support Switching the screen imageDisplaying system information Opening the Print Options windowUsing the keypads Using the embedded numeric keypad Enabling and disabling the embedded numeric keypadUsing an optional external numeric keypad Switching key functions on the embedded numeric keypadPower Power control and light locationsShutting down the computer PropertiesUsing the power meter Setting power optionsUsing power-saving states Initiating and exiting StandbyUsing battery power Setting password protection upon exiting StandbyDisplaying the remaining battery charge Inserting or removing the batteryCharging a battery Identifying low battery levels Managing low battery levelsConserving battery power Resolving a low battery levelStoring a battery Using external AC powerDisposing of a used battery Connecting the AC adapter Using the audio features Using multimedia hardwareMultimedia Using the audio-out headphone jack Using the audio-in microphone jackAdjusting the volume Using the external monitor port Using the video featuresUsing the Hdmi port Using multimedia software Using multimedia softwareOpening preinstalled multimedia software Select Start All ProgramsObserving the copyright warning Changing DVD region settingsPreventing playback disruptions Select Start My ComputerUsing wireless controls WirelessAbout integrated wireless devices Using WlanSetting up a Wlan Identifying a Wlan device Connecting to a WlanUsing wireless security features Select Start HP System InformationConnecting a modem cable Using a modemModem and LAN Connecting a country- or region-specific modem cable adapter Adding new locations when traveling Selecting a location settingViewing the current location selection Check the telephone line type Solving travel connection problemsCheck for pulse or tone dialing Click Properties Connecting to a local area networkSet the modem to ignore dial tones Clear the check box for Wait for dial tone before dialingPage Security Protecting the computerUsing administrator and user passwords Using passwordsSetting passwords in Windows Automatic logonAdministrator logon Setting passwords in Computer SetupUsing a setup password Manual logonEntering a setup password Using a power-on passwordManaging a setup password Managing a power-on passwordEntering a power-on password Installing a security cableRequiring a power-on password at restart Security Connecting a USB device Connecting hardwareUsing a USB device Removing a USB deviceUsing the USB Storage Options utility Securing USB portsUsing Media Card Reader cards Inserting a digital card Removing a digital card Using ExpressCards Configuring an ExpressCardInserting an ExpressCard Removing an ExpressCard Using optical drives select models only Hardware upgradesIdentifying installed drives Handling drivesInserting an optical disc CD or DVD When the disc tray does not open When the disc tray opensRemoving an optical disc CD or DVD Using external drives Using optional external devicesUsing an optional external MultiBay or external MultiBay Inserting and replacing memory modulesPage Page Page Page Multiboot About the boot order deviceEnabling boot devices in Computer Setup Considering boot order changesDynamically choosing a boot device using the F9 prompt Choosing Multiboot preferencesSetting a new boot order in Computer Setup Setting a MultiBoot Express promptEntering MultiBoot Express preferences Using Computer Setup Computer SetupStarting Computer Setup Navigating and selecting in Computer SetupRestoring factory settings in Computer Setup Computer Setup menusFile menu System Configuration menu Diagnostics menuSecurity menu Set the Express Boot Popup delay in seconds Routine care Cleaning the displayCleaning the keyboard Traveling and shippingPage Index USBJacks Hdmi USB SAM
Related manuals
Manual 4 pages 19.71 Kb Manual 7 pages 22.56 Kb Manual 125 pages 58.79 Kb

4410t Mobile specifications

The HP 4410t Mobile is a versatile mobile workstation designed to meet the demands of professionals who require both power and portability. It combines a sleek design with robust performance capabilities, making it an ideal choice for users who need reliable computing on the go.

At the heart of the HP 4410t is its powerful Intel Core processor. Available in various configurations, this processor ensures smooth multitasking and efficient performance. With options for different generations, users can select a model that best fits their computing requirements. The laptop's memory capacity can be expanded, allowing for more applications to run simultaneously, which is a crucial feature for professionals in design, engineering, and technical fields.

The display of the HP 4410t is another standout feature. It boasts a 14-inch HD display that provides crisp visuals and vibrant colors, making it ideal for design work and presentations. The anti-glare technology ensures that users can work comfortably even in brightly lit environments. This feature is particularly beneficial for professionals who spend extended hours in front of their screens.

In terms of storage, the HP 4410t offers a range of options, including solid-state drives (SSDs) that provide faster data access speeds compared to traditional hard drives. This enhances the overall responsiveness of the system, allowing users to boot up quickly and load applications with minimal delay.

Connectivity is also a strong point for the HP 4410t. It includes multiple USB ports, including USB 3.0 for high-speed device connections, HDMI for video output, and Ethernet for wired networking. This range of ports ensures that users can connect to various peripherals and networks seamlessly.

The HP 4410t is built with durability in mind. It features a robust chassis designed to withstand the rigors of mobile use. The spill-resistant keyboard and reinforced hinges are testament to its longevity and reliability.

Moreover, security is a priority in the HP 4410t. It comes equipped with features such as a fingerprint reader and advanced encryption options, ensuring that sensitive data remains protected.

Finally, the mobility of the HP 4410t is enhanced by its lightweight design and long battery life, making it an excellent choice for professionals who are frequently on the move. In summary, the HP 4410t Mobile combines power, performance, and portability, making it a reliable workstation for anyone needing high-performance computing while on the go.
Top Page Image Contents