HP 4320t Mobile manual Inserting an optical disc CD or DVD, Removing an optical disc CD or DVD

Optical drive type	Read from CD and	Write to CD-RW	Write to DVD±RW	Write to DVD+R DL
	DVD-ROM discs	discs	discs	discs
DVD-ROM	Yes	No	No	No

CAUTION: To prevent possible audio and video degradation, or loss of audio or video playback functionality, do not initiate Sleep while reading from a CD or DVD.

If Sleep is initiated during playback of a disc, you may experience the following behaviors:

●Your playback may be interrupted.

●You may see a warning message asking if you want to continue. If this message is displayed, click No.

●You may need to restart the CD or DVD to resume audio and video playback.

Inserting an optical disc (CD or DVD)

1.Turn on the computer.

2.Press the release button (1) on the drive bezel to release the disc tray.

3.Pull out the tray (2).

4.Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up over the tray spindle.

NOTE: If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.

5.Gently press the disc (3) down onto the tray spindle until the disc snaps into place.

6.Close the disc tray.

NOTE: After you insert a disc, a short pause is normal before playback begins.

Removing an optical disc (CD or DVD)

There are 2 ways to remove a disc, depending on whether the disc tray opens normally or not.

58 Chapter 14 Hardware upgrades