Keys Used to Manipulate the RPN Stack
•Press (to perform a roll down of the stack. Note the small arrow on the key. A roll down moves the numbers in each register down one level, and the number in the bottom register moves up to the top of the stack.
•Press Dto perform a swap of the stack. Note the small symbol on the key. A swap operation exchanges the numbers of the X and Y registers of the stack.
•If no menu is selected, the <key performs the roll down operation, and the >key performs the swap operation.
Algebraic Mode
To perform the same example in Table
from left to right. Press :u<(five times) followed by Ito set the operating mode to Algebraic. The message on screen, Algebraic , con- firms your choice. Press Oto return to the default calculator screen, then
press: J(3+4D*(5+6DK
Note the expression displays on screen in the order in which it is keyed. Press =to return a result of 77.00.
Chain Mode
To perform the same example in Chain mode, use parentheses to set the order of operation as you did in Algebraic mode. Calculations in Chain mode are interpreted in the order in which they are entered. If you press an
operation key,