Installation Instruction

J	SPLIT-SYSTEM HEAT PUMPS
	SPLIT-SYSTEM HEAT PUMPS
	OUTDOOR UNITS

Supersedes: 035-16192-000 (0601)

035-16192-001-A-1001

MODELS E1FB180 & E1FB240

O OO

GENERAL

The outdoor units are completely piped and wired at the fac- tory and are shipped ready for immediate installation. Only the interconnecting liquid and suction lines, sight glasses, control wiring, and the main power wiring are required to complete the installation. Every unit is dehydrated, evacu- ated, leak tested and pressure tested at 450 psig before be- ing pressurized with a holding charge of refrigerant-22 for shipment and/or storage.

To eliminate the costly cabinet deterioration problems usually associated with outdoor equipment, all sheet metal parts are constructed of commercial grade (G90) galvanized steel. Af- ter fabrication, each part is thoroughly cleaned to remove any grease or dirt from its surfaces. The parts that will be exposed to the weather are then coated with a “desert sand” powder paint to assure a quality finish for many years. This coating system has passed the 750-hour, salt spray test per ASTM Standard B117.

Every unit includes 2 heavy-duty scroll compressors, 2 suc- tion line accumulators, 2 4-way reversing valves with a 24 volt solenoid, 2 outdoor fan motors with inherent protection, and a copper tube/aluminum fin coil that is positioned verti- cally for better drainage of the water that will condense on it

during the heating cycle.

They also include 2 filter driers, 2 expansion valves and dis- tributors that are only used during the heating cycle plus a check valve to provide the proper flow of refrigerant through the unit during both the cooling and heating cycles.

All controls are located in the front of the unit and are readily accessible for maintenance, adjustment and service. All wir- ing (Power and Control) can be made through the front of the unit.

REFERENCE

This instruction covers the installation and operation of the ba- sic condensing unit. For information on the installation and op- eration of the matching indoor units, refer to Installation Instruction part no. 035-16626-000 (form 515.41-N4Y).

All accessories come with a separate Installation Manual.

Refer to Parts Manual for complete listing of replacement parts on this equipment.

All forms may be ordered from:

Standard Register

Norman, OK 73069

Toll Free: Tel. 877-318-9675/Fax. 877-379-7920

INSPECTION

As soon as a unit is received, it should be inspected for pos- sible damage during transit. If damage is evident, the extent of the damage should be noted on the carrier's freight bill. A separate request for inspection by the carrier's agent should be made in writing.

Installer should pay particular attention to the words: NOTE, CAUTION and WARNING. Notes are intended to clarify or make installation easier. Cautions are given to prevent equipment damage. Warnings are given to alert installer that personal injury and/or equipment damage may result if installation procedure is not handled properly.

E1FB240, E1FB180 specifications

The York E1FB180 and E1FB240 are part of York's advanced series of commercial heating and cooling systems, specifically designed to meet the dynamic needs of modern edifices. These models stand out due to their balance of efficiency, reliability, and innovative technology, making them ideal solutions for a myriad of industrial and commercial applications.

One of the main features of the York E1FB series is its impressive energy efficiency. Both the E1FB180 and E1FB240 incorporate high-efficiency compressors that significantly reduce electricity consumption while providing optimal performance. This energy efficiency is crucial not only for reducing operational costs but also for ensuring compliance with increasingly stringent environmental regulations.

In terms of technology, the E1FB series utilizes advanced inverter-driven technology. This feature allows the system to adjust its cooling and heating output based on real-time demand, enabling it to operate at varying speeds. Consequently, this results in quieter operation and a reduction in wear and tear on the components, prolonging the lifespan of the equipment.

Moreover, both models possess robust construction to withstand the rigors of commercial environments. They are built using high-quality materials that ensure durability and reliability even in challenging conditions. This is complemented by an array of corrosion-resistant features, making them suitable for installation in diverse geographical locations, including coastal areas where salt and moisture are prevalent.

The York E1FB180 and E1FB240 also come equipped with sophisticated control systems. These smart controls allow for easy integration into building management systems, enabling real-time monitoring and management. This integration facilitates better energy management practices, yielding further operational savings and improved efficiency.

Additionally, the E1FB series incorporates environmentally friendly refrigerants that align with global initiatives for reducing greenhouse gas emissions. This commitment to sustainability is a cornerstone of York’s design philosophy and is increasingly important for businesses seeking to enhance their green credentials.

In summary, the York E1FB180 and E1FB240 are exemplary models that reflect the brand's commitment to efficiency, durability, and advanced technology. Their innovative features make them a preferred choice for businesses looking to invest in reliable HVAC solutions that not only meet but exceed contemporary performance and environmental standards.